Steam & Sauna Buyer's Club

 

Title
FAN KIT, IN-SHOWER, WALL, PC

Bathology Atmospheric 410

Steam and Shower Ventilation Fan System

Model
Atmospheric 410

Transform your steam, shower or wet environment with the benefits of ventilation, by Bathology!

The Atmospheric 410 Steam and Shower Ventilation Fan System is the builder's choice for controlling humidity and temperature in most any wet environment.  

MSRP
$2,300.00
Your Price
$1,610.00
  • Whisper quiet performance
  • High CFM/Watt efficiency
  • Superior performance @ Higher Static
  • Stainless Steel decorative grille, 6” diameter
  • Motorized backdraft damper
  • Variable speed control
  • In-shower keypad
  • 20-Minute auto shutoff
  • Energy Star Rated
  • CSA Listed
  • UL Listed for Wet Locations
  • Exterior wall fan, 124 CFM (option)
  • Exterior roof/wall fan, 116 CFM (option)
  • Duct reducer collar, 5” to 4" diameter (with roof fan only)
  • Duct extension collar, 4” diameter (with wall fan only)
  • Motorized damper, 4"
  • Stainless Steel grille
  • Elbow, 90º, gasketed, 4”
  • Power supply, 120VAC
  • Fan switch
  • Switch cable with coupler, 25’
  • Flex duct, 4"x 25' (25' is maximum length)
  • RTV silicone sealant, .5 ounce tube
  • Mastic, 1/12gal cartridge
  • Two NEMA Male plug, 6’
  • Two Strain relief bushings
  • Three duct reducer/extension collar screws
  • Three damper screws
  • Two power supply mounting screws, 1"
  • Two mounting screw anchors
  • Four fan mounting screws, 1-1/2"
  • Four fan mounting screw anchors
  • Two duct ties, 18"
  • Two duct ties, 36"
  • Manufacturer’s warranty
  • Installation manual
Swipe horizontally to reveal full table content.
Model Atmospheric 410
Swipe horizontally to reveal full table content.
Wall fan (option)
Type Exterior, Wall, 4" Duct Connection
Duct Connection 4" Diameter
Duct Extension Aluminum, 12" Length
Dimensions 10-1/2"W x 13"H x 6"D
Housing Composition Galvanized Steel, 20 Gauge
Housing Finish Baked Powder-Coat Finish, White
Air Volume 124 CFM
AC Voltage 120V AC
power Consumption 19W
Nominal Amperage 0.17A
Lubrication Permanently Lubricated, Sealed Ball Bearings
Protection Thermal Overload, Automatic Reset
Speed Control 20-100%
Airstream Tolerance 34°-140°F
Weight 8 lbs
"Rough-In" Cut-Out 4-3/8" Diameter
Testing CSA Listed, UL Listed, Energy Star Rated
Swipe horizontally to reveal full table content.
Roof/Wall Fan (option)
Type Exterior, Roof/Wall, 5" Duct Reducer Connection
Duct Reducer Collar Galvanized Steel, 22 Gauge, 6" Length, 5" to 4" Diameter
Duct Connection 4" Duct
Dimensions 10-15/16" Diameter x 6"H
Base Plate Dimensions 15-1/2"W x 15-1/2"L
Housing Composition Galvanized Steel, 22 Gauge
Housing Finish Baked Powder-Coat Finish, Gray
Air Volume 116 CFM
AC Voltage 120V AC
Power Consumption 19W
Nominal Amperage 0.18A
Lubrication Permanently Lubricated, Sealed Ball Bearings
Protection Thermal Overload, Automatic Reset
Speed Control 20-100%
Airstream Tolerance 34°-140°F
Weight 11 lbs
"Rough-In" Cut-Out 5-3/8" Diameter
Testing U.L. Listed; CSA Listed
Swipe horizontally to reveal full table content.
Damper
Type Motorized, Positive Close, Spring-Tensioned
Dimensions 7-3/4"W x 10"L x 5"H
Body Composition Galvanized Steel, 28 Gauge
Blade Composition Galvanized Steel, 22 Gauge
Seal Composition Vinyl Foam, Low Density
AC Voltage 120VAC
Motor High Torque
Endurance Test 100,000 cycles
Swipe horizontally to reveal full table content.
Grille
Type Decorative, 4" Duct Connection
Dimensions 6" Diameter, 1-1/2" Profile
Composition 304 Stainless Steel
Finish #4 Sanitary
"Rough-In" Cut-Out 4-1/4" Diameter
Swipe horizontally to reveal full table content.
Elbow
Type 90°, Stamp/Stitch Welded, Flangeless, Dual-Gasketed
Composition Galvanized Steel, 22 Gauge
Gasketing EPDM Rubber, Dual - Wiper & Hollow
Wiper Gasket ASTM D2000-86 M3BA 810 B13 C12 F17, Black
Hollow Gasket ASTM D2000-86 M8BA 507 B13 C12, Green
Gasket Operating Temperature -20°F to 140°F
Swipe horizontally to reveal full table content.
Duct
Type Insulated, Reinforced, Flex, Three-Ply
Interior DImensions 4” Diameter x 25’ Length
Exterior Dimensions 6" Diameter x 25' Length
Interior Ply Composition Dual Lamination Polyester with Encapsulated Wire Helix
Middle Ply Composition Fiberglass
Exterior Ply Composition Polyester, Tri-Directional Fiberglass Scrim Reinforced, Gray
R-Value 4.2
Operating Temperatures -20°F to 140°F
Testing UL-181
Swipe horizontally to reveal full table content.
Duct Tie
Composition Nylon, Natural
Operating Temperatures Max 185°F
Tensile strength 175 lbs
Testing UL 181-B-C Approved
Swipe horizontally to reveal full table content.
Mastic
Type Duct Sealant, Water Based, UV Resistant
Composition Liquid, Gray, 1/12-Gallon
Use Indoor / Outdoor
Tesing UL 181B, USDA, FDA, EPA approved
Swipe horizontally to reveal full table content.
Fan Switch
Type Flush-Mounted, In-Shower
Voltage 5V DC
Diameter 2-1/32”
Trim Depth 3/16”
Trim Finish Polished Chrome or Brushed Nickel
Body Diameter 1-17/32”
Body Depth 1-5/16”
"Rough-In" Cut-Out 1-1/2” Diameter
Time Circuit 20-Minute Off Delay
Wall Material Thickness 2-1/2”
Swipe horizontally to reveal full table content.
Power Supply
Operating Voltage 120V AC
Nominal Amperage 15 AMPS
Length 7-7/8”
Width 7-1/2”
Height 3-1/4”
Testing CSA, Type 2