Steamist HC-24
HC Series 24 kW Commercial Steam Room Generator
The Steamist HC-24 is a 24kW electric steam room generator engineered for the most demanding commercial health club steam showers that need dependable, around-the-clock operation and is designed to power steam showers with dimensions up to 1,000 adjusted cubic feet (ACF).
See Shipping Tab
HC Boiler
- Industrial grade heating element
- Pressurized vessel for instant steam operation
- Durable electronic components
- Built to ASME code
- Available automatic system for daily blowdown
- Operates with electronic steam room temperature control
- Full 1” drain port
- Operating, electronic high limit and ASME safety valve pressure systems
- UL listed and built to ASME B & PV code
- Sight glass
DCCP Digital Commercial Control Package
- Digitial touchpad
- Programmable time user control
- "Idle" energy conservation mode
- 7-day, 24-hour programmable timer
- Up to 6 daily programmable settings changes
- HC-PCMR Auxiliary Manual Reset Pressure Cutoff
- DCC Digital Command Center control with 50' cable
- User Bypass Control with 50' cable
- Room Sensor with 50' cable
- Control Module
- Steam Solenoid, factory installed
- Steamhead with Cool Sense cover
- Installation and operation manual
- Limited warranty
| Model | HC-24 |
|---|---|
| Minimum Adjusted Cubic Feet | 741 |
| Maximum Adjusted Cubic Feet | 1000 |
| Kilowatt Rating | 24 KW |
| Shipping Weight | 200 lbs. |
| Water Supply Connection | 1/2" NPT |
| Generator Steam Line Connection | 3/4" NPT |
| Steam Head Connection | 3/4" |
| Drain Connection | 3/4" |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve | 15 PSIG |
| Control Sensor Cable | 2 Conductor, 22 AWG, Shielded Cable |
| Control Sensor "Rough In" Cut Out | 5/8" Diameter |
| Generator Control Connection | 3 Wire Nuts |
| Generator Control Cable | 3 Conductor, 22 AWG, Shielded Cable |
| Width | 39" |
| Depth | 22" |
| Height | 28" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Designed for use as a second room control with the HC Series of Steam Boilers, the Steamist SRP control package comes complete with an additional user bypass control and cable, a room sensor and cable, a steam solenoid pre-assembled to the generator, and a steam head.
**NOTE: Only sold with boiler.
Included with all Traditional and Transitional Steamist operating control packages, this 3/4” NPT steam head has been designed to provide a safe and pleasurable steam bath experience. Available standard in polished chrome or choose from seven optional designer finishes.
Control not included
Designed for use with HC-24 to HC-72 boilers, this mounting stand raises the steam generator for both safety and comfort during maintenance and repair.
Steamist's TA-100 Programmable Steamroom Temperature Alert helps ensure the safety and comfort of member bathers. Designed for use with Steamist HC series steam bath generators in health clubs, hotels, and spas.
Designed for use as a second room control with the HC Series of Steam Boilers, the Steamist SRP control package comes complete with an additional user bypass control and cable, a room sensor and cable, a steam solenoid pre-assembled to the generator, and a steam head.
**NOTE: Only sold with boiler.
Steamist HC-EUC Eucalyptus Aromatherapy Pure Oil, for use with the AP-100 Aroma Pump System.
Aroma Pump System sold separately. 1100mL (37.2 oz)
THIS PRODUCT HAS BEEN DISCONTINUED. PLEASE SEE OUR AROMA SELECTION
Steamist HC-LAV Lavendar Aromatherapy Oil, for use with the AP-100 Aroma Pump System.
Aroma Pump System sold separately.
Optional on HC series steam bath generators, this manual reset low water cutoff offers an independent, secondary control device which is required in many states (including GA, IA, MA, NC, TX, & WA).
Designed for use with the DCCP Digital control and optional on all HC boilers, this electrically operated drain valve provides automatic routine boiler draining.
This product is not sold separately. It must be purchased on the same order as a compatible boiler.
The optional Steamist ASME Blow-down Tank meets ASME code and is designed to safely augment the blowdown process.
See Shipping Tab
Installs into drain line as an alternative to a blowdown tank for tempering hot blowdown water. Injects cold tap water when thermal actuator senses blowdown water over 120°F. As blowdown water cools, valve reduces cold inlet flow. At approximately 110°F cold inlet is fully closed.