Steam & Sauna Buyer's Club

 

BOILER PKG, 30.0KW 208/3

Mr.Steam C1250

CU Series 30kW Steam Shower Generator

Model
C1250

The new Mr. Steam C1250 commercial steam bath generator is engineered for around-the-clock use in the most demanding commercial steam showers. This 30-kilowatt pressurized steam generator includes a control, steam solenoid valve, steamhead, and automatic blowdown system and is designed for one or two steam rooms with dimensions up to 1250 cubic feet (CF)

C1250 Club Generator

  • Sight glass
  • Standard with full 1" drain port
  • Stainless steel jacket
  • Compact vertical design
  • Durable electronic components
  • Features National Board registered pressure vessel
  • Use high quality fibrous glass pressure vessel insulation for maximum energy performance
  • Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
  • Steam-rated operating and high limit pressure controls for Steam-On-Demand
  • Pressure gauge and sight glass to provide operating information at a glance
  • Easy installation and service accessibility
  • Meet ASME requirements and UL/CSA nationally recognized testing standards

Digital 1 Control

  • Steam room temperature regulating sensor
  • Advanced low-mass, quick response thermistor with sensor guard
  • Durable and capable of responding to steam room temperature within tight tolerances
  • Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4X4 electrical box
  • Allows owner/operator to set room temperature accurately and reliably
  • Providing efficient, consistent control with full 100° F - 120°F range
  • Integrated in-steam room high temperature control provides an additional level of reliability

Steam Solenoid Valve

  • All brass construction with stainless steel trim, sized to match steamhead distribution
  • Steam-rated seat for high reliability and quick response steam delivery

Aromasteam Steamhead

  • All brass construction with polished chrome finish
  • Full 3/4 inch NPT size for quiet, controlled steam delivery
  • Supplied with full coverage polycarbonate cover
  • Engineered to operate seamlessly with Mr.Steam's AromaFlo aromatic oil delivery system

Automatic Blowdown System

  • System programmed daily discharge of accumulated sediment
  • Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
  • Auxiliary Manual Reset
  • Independent manual reset
  • Backup low water cutoff control
  • Steam bath generator 30"L x 20"W x 38"H
  • Installation and operation manual
  • Limited warranty
Swipe horizontally to reveal full table content.
Model C1250
Minimum Cubic Feet 1001 CF
Maximum Cubic Feet 1250 CF
Kilowatt Rating (kW) 30 kW
Shipping Weight (Lbs.) 250 lbs
Water Supply Connection 1/4" NPT
Generator Steam Line Connection 1" NPT
Steam Head Connection 3/4" NPT
Drain Connection 1" NPT
Safety Relief Valve Connection 3/4" NPT
Safety Relief Valve PSIG 15 PSIG
Control 'Rough In' Cut Out 3-1/2" x 3-1/2"
Control Sensor Cable 30' 5', 25', 2 Conductor, 24 AWG, Shielded Cable
Control Sensor 'Rough In' Cut Out 3/8" Diameter
Generator Control Connection 6 Position Terminal Block
Generator Control Cable 6' Long, 4 Conductors, 16 AWG
Width In Inches 20"
Depth In Inches 30"
Height In Inches 38"