Amerec AK7.5
AK Series 7.5kW Steam Shower Generator
Special offer! The 7.5kW Amerec AK7.5 home steam shower generator is engineered for residential and day spa steam baths up to 200 adjusted cubic feet (ACF).
Required control sold separately.
- Sequential temperature control for consistent flow
- Stainless steel tank
- Industrial grade, serviceable heating elements
- Durable electronic components
- Electronic water-level control system
- Low voltage safety control circuits
- Available Auto Drain automatic draining system
- Ability to field wire for 1-phase or 3-phase phase
- Ability to connect multiple generators to heat steam baths larger than 550 cubic feet
- Operates with inside/outside shower, on/off, time/temperature controls
- Full 3/4" port drain valve
- ASME safety valve
- UL/CSA/CE listed
- 7.5KW steam bath generator
- Installation and operation manual
- Limited warranty
| Model | AK7.5 |
|---|---|
| Minimum Adjusted Cubic Feet | 80 |
| Maximum Adjusted Cubic Feet | 200 |
| Kilowatt Rating (KW) | 7.5 KW |
| Shipping Weight (Lbs.) | 35 lbs |
| AC Voltage | 240V AC |
| DC Voltage | 5V DC |
| Phase | Single Phase |
| Nominal Amperage | 31 Amps |
| Recommended Protective Device | 40 Amp |
| Recommended Minimum Copper Wire Supply | 8 AWG |
| Water Supply Connection | 3/8" NPT |
| Generator Steam Line Connection | 1/2" NPT |
| Steam Head Connection | 1/2" NPT |
| Drain Connection | 3/4" NPT |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve PSIG | 10 PSIG |
| Control "Rough In" Cut Out | 2-3/8" Diameter |
| Control Sensor Cable | 25', 2 Conductor, 22 AWG, Shielded Cable |
| Control Sensor "Rough In" Cut Out | 7/8" Diameter |
| Generator Control Connection | 8 Pin, Snap-In Connector |
| Generator Control Cable | 25', 8 Conductor, 28 AWG, Shielded Cable |
| Width In Inches | 16-1/2" |
| Depth In Inches | 6-1/4" |
| Height In Inches | 15" |
On sale now - limited supplies! Amerec Glacier K2 Operating Equipment Package for AK Series Steam Shower Generators. Includes K2 Control, ComfortFlo Steam Head, ADK Auto Drain, ADP Drip Pan, Limited Lifetime Warranty.
On sale! Amerec Columbia K3 Operating Equipment Package for AK Series Steam Shower Generators. Includes K3 Control, Sensor, Cables, ComfortFlo Steam Head, ADK Auto Drain, ADP Drip Pan, Lifetime Limited Warranty.
The Amerec K2 Digital Control Package works with Amerec AK Series Steam Generators. Wi-Fi and smart home ready, this control features adjustable time, temperature, and a 24-hour delay. Includes a ComfortFlo Steam Head.
The Amerec K4 steam shower generator control kit works with Amerec AK-series steam bath generators. This control kit may be mounted inside or outside the steam room and features a non-thermostatic control and includes a ComfortFlo steam head.
Amerec ADP stainless-steel steam generator drip pan with threaded drain fitting.
The 5304-031 Control Cable is a 25' 8-Pin cable for use with the KT60, K60, K30, R30K, and DC60 operating controls. From the year 1993 to current. This cable is also used for connecting generators together for use as a tandem system.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
On sale! Amerec ComfortFlo Steam Head with aroma reservoir and insulator. 1/2" NPT
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
On sale - limited supplies! Transform your steam room into a luxurious aroma bath with Amerec Eucalyptus Steam Shower Aroma Essential Oil. Place a few drops of oil into the reservoir on your steamhead and elevate your steam shower experience.
The A220FP introduces aromatherapy oils directly into the steam line while allowing the bather to initiate the pump from inside the steam shower enclosure. The fragrance controller allows the bather to adjust the strength and frequency and eliminates the needs to dispense the oils directly into the steamhead.
Designed to be used with the AK steamers.