Mr.Steam C1250
CU Series 30kW Steam Shower Generator Package w/CU1250
The Mr.Steam C1250 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 1250 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 30kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, and Solenoid Valve.
See Shipping Tab
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr. Steam's AromaFlo aromatic oil delivery system
- Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
- Auxiliary Manual Reset
- Independent manual Reset
- Back low water cutoff control
- Steam bath generator 30"L x 20"W x 38"H
- Steam Bath Generator 30"L x 20"W x 38"H
- Installation and Operation Manual
- Limited Warranty
| Model | C1250 |
|---|---|
| Minimum Cubic Feet | 1001 CF |
| Maximum Cubit Feet | 1250 CF |
| Kilowatt Rating (kW) | 30 kW |
| Shipping Weight (Lbs.) | 250 lbs |
| Water Supply Connection | 1/4" NPT |
| Generator Steam Line Connection | 1" NPT |
| Steam Head Connection | 3/4" NPT |
| Drain Connection | 1" NPT |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve PSIG | 15 PSIG |
| Control 'Rough In' Cut Out | 3-1/2" x 3-1/2" |
| Control Sensor Cable | 30' 5'.25' 2 Conductor, 24 AWG, Shielded Cable |
| Control Sensor 'Rough In' Cut Out | 3/8" Diameter |
| Generator Control Connection | 6 Position Terminal Block |
| Generator Control Cable | 6' Long, 4 Conductors, 16 AWG |
| Width In Inches | 20" |
| Depth In Inches | 30" |
| Height In Inches | 38" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
The step-down transformer is used to supply the 120V control circuit.
The step-down transformer is used to supply the 120V control circuit.
This CU SteamStop emergency stop switch electronically shuts down the steam generator and initiates the Digital 1 internal alarm and the CU Alarm, if installed.
This audible alarm sounds in the event the steam room maximum set temperature is exceeded or the CU SteamStop switch is pressed.
High temperature limit device for use with any Mr Steam CT or CU steam generator system to provide temperature shutoff and alarm functions.
The Mr.Steam LEDLITE was designed with precise attention to detail and crafted with aluminum bezels for durability. You won't need to worry about temperature levels or moisture with this low-voltage LED recessed light. The dimmable feature matched with an impressive 600 lumens gives you the ability to have your lighting match your mood.
The boiler-mounted Mr. Steam CU1-Digital1 room temperature control allows facility operators to set and maintain a 100-120-degree steam room temperature range. The CU1-Digital 1 includes a Digital 1 Operating Control with a sensor guard, a ¾” Steam Solenoid Valve, a ¾” Steam Head and operates with the Mr. Steam CU360-CU1400 steam room boilers. The Mr. Steam CU1-Digital1 is for new boilers only, to upgrade your F1 control, see the CU-104066 Field Kit.
This 30-Minute Mechanical Count-Down Timer w/Steam Vent works in conjunction with Digital 1 Control Package.
The optional Mr.Steam CU-BDT-ASME36 Blowdown Tank meets ASME code and is designed to safely augment the blowdown process.