ThermaSol PRO-575
PRO Series 15kW Steam Bath Generator
The ThermaSol PRO-575 is designed for home steam baths with dimensions from 396 to 575 adjusted cubic feet (ACF).
Required control package sold separately.
- FastStart technology standard
- SmartSteam technology standard
- "Whisper quiet" operation
- Industrial grade, serviceable heating element
- Integral drain pan with 3/4" NPT fitting
- Pre-plumbed pop-safety valve to drain pan
- Stainless steel design inside and out
- Durable electronic components
- Electronic water-level safety system
- Secondary electronic water-level control system
- Mechanical water-level control operating system
- Auto PowerFlush pressurized maintenance system
- Water tight data link control cable
- Low voltage safety control circuits
- Operates with waterproof sound and light system
- CSA/CUL listed
- ASME safety valve
- 50' Long Data Link Control Cable
- Brass SteamHead Housing
- Installation and Operation Manual
- Limited Warranty
| Model | PRO-575 |
|---|---|
| Minimum Cubic Feet | 396 |
| Maximum Cubic Feet | 575 |
| Kilowatt Rating (KW) | 15 KW |
| Shipping Weight (Lbs.) | 34 lbs |
| AC Voltage | 240V AC |
| Phase | Single Phase |
| Nominal Amperage | 69 Amps |
| Recommended Protective Device | 90 Amp |
| Recommended Minimum Copper Wire Supply | 4 AWG |
| Water Supply Connection | 3/8" NPT |
| Generator Steam Line Connection | 1/2" NPT |
| Steam Head Connection | 1/2" NPT |
| Safety Relief Valve Connection | 3/4" NPT |
| Safety Relief Valve PSIG | 15 PSIG |
| Control "Rough In" Cut Out | 1-1/16" |
| Generator Control Connection | CAN-Bus Connection |
| Generator Control Cable | 50' Data Cable |
| Width In Inches | 17" |
| Depth In Inches | 11-1/2" |
| Height In Inches | 12" |
Designed for the unlikely event of a slow water leak, the ThermaSol Drain Pan installed beneath the steam generator will aid in the trapping and redirecting of this water to an acceptable and predetermined area.
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
Note: Also compatible with PRO III series generators
A cleaner specially formulated for steam showers!
No mixing and ready to use, this 22-ounce convenient spray cleaner is all that is required to clean and sanitize your steam shower.
A cleaner specially formulated for steam rooms! This economical concentrate makes up to four gallons.
This powerful disinfectant cleaner kills mold, mildew and odor-causing fungi on contact.
Pure 110 is the ideal, low-cost steam bath in-line water filter by Bathology!
Pure 410 is the ideal steam bath water filter by Bathology!
Pure 410 utilizes a 10-micron tightly spun; drop-in filter media to reduce the steam bath generator water particulate which contributes to scale build-up and clogged orifices.
Ideal steam bathing water by Bathology!
Preserve steam bath generator warranties, extend equipment life and enhance the steam bathing experience with Pure 420 water conditioning innovation.
Ideal steam bathing water by Bathology!
Preserve steam bath generator warranties, extend equipment life and enhance the steam bathing experience with Pure 401 water conditioning innovation.