Mr.Steam C1400
CU Series 36kW Steam Shower Generator Package w/CU1400
The Mr.Steam C1400 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 1400 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 36kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, Solenoid Valve, and Auxiliary Manual Reset.
See Shipping Tab
C1400 Club Generator
- Sight glass
- Standard with full 1" drain port
- Stainless steel jacket
- Compact vertical design
- Durable electronic components
- Features National Board registered pressure vessel
- Use high quality fibrous glass pressure vessel insulation for maximum energy performance
- Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
- Steam-rated operating and high limit pressure controls for Steam-On-Demand
- Pressure gauge and sight glass to provide operating information at a glance
- Easy installation and service accessibility
- Meet ASME requirements and UL/CSA nationally recognized testing standards
Digital 1 Control
- Steam room temperature regulating sensor
- Advanced low-mass, quick response thermistor with sensor guard
- Durable and capable of responding to steam room temperature within tight tolerances
- Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4X4 electrical box
- Allows owner/operator to set room temperature accurately and reliably
- Providing efficient, consistent control with full 100˚ F - 120˚ F range
- Integrated in-steam room high temperature control provides an additional level of reliability
Steam Solenoid Valve
- All brass construction with stainless steel trim, sized to match steamhead distribution
- Steam-rated seat for high reliability and quick response steam delivery
Aromasteam Steamhead
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr.Steam's AromaFlo aromatic oil delivery system
Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
Auxiliary Manual Reset
- Independent manual reset
- Backup low water cutoff control
- Steam bath generator 30"L x 20"W x 38"H
- Installation and operation manual
- Limited warranty
Model | C1400 |
---|---|
Minimum Cubic Feet | 1251 CF |
Maximum Cubic Feet | 1400 CF |
Kilowatt Rating | 36 KW |
Shipping Weight | 300 lbs |
Water Supply Connection | 1/4" NPT |
Generator Steam Line Connection | 1" NPT |
Steam Head Connection | 3/4' NPT |
Drain Connection | 1" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control "Rough In" Cut Out | 3-1/2" x 3-1/2" |
Control Sensor Cable | 30' 5", 25', 2 Conductor, 24 AWG, Shielded Cable |
Control Sensor "Rough In" Cut Out | 3/8" Diameter |
Generator Control Connection | 6 Position Terminal Block |
Generator Control Cable | 6" Long, 4 Conductors, 16 AWG |
Width | 20" |
Depth | 30" |
Height | 38" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Mr.Steam C2000
CU Series 48kW Steam Shower Generator Package w/CU2000
The Mr.Steam C2000 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 2000 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 48kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, Solenoid Valve, and Auxiliary Manual Reset.
See Shipping Tab
C2000 Club Generator
- Sight glass
- Standard with full 1" drain port
- Stainless steel jacket
- Compact vertical design
- Durable electronic components
- Features National Board registered pressure vessel
- Use high quality fibrous glass pressure vessel insulation for maximum energy performance
- Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
- Steam-rated operating and high limit pressure controls for Steam-On-Demand
- Pressure gauge and sight glass to provide operating information at a glance
- Easy installation and service accessibility
- Meet ASME requirements and UL/CSA nationally recognized testing standards
Digital 1 Control
- Steam room temperature regulating sensor
- Advanced low-mass, quick response thermistor with sensor guard
- Durable and capable of responding to steam room temperature within tight tolerances
- Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4X4 electrical box
- Allows owner/operator to set room temperature accurately and reliably
- Providing efficient, consistent control with full 100˚ F - 120˚ F range
- Integrated in-steam room high temperature control provides an additional level of reliability
Steam Solenoid Valves (2)
- All brass construction with stainless steel trim, sized to match steamhead distribution
- Steam-rated seat for high reliability and quick response steam delivery
Aromasteam Steamheads (2)
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr. Steam's AromaFlo aromatic oil delivery system
Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
Auxiliary Manual Reset
- Independent manual reset
- Backup low water cutoff control
- Steam bath generator 33"L x 24"W x 44"H
- Installation and operation manual
- Limited warranty
Model | C2000 |
---|---|
Minimum Cubic Feet | 1401 CF |
Maximum Cubic Feet | 2000 CF |
Kilowatt Rating | 48KW |
Shipping Weight | 350 lbs |
Water Supply Connection | 1/2" NPT |
Generator Steam Line Connection | 1" NPT |
Steam Head Connection | 3/4" NPT |
Drain Connection | 1" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control "Rough In" Cut Out | 3-1/2" x 3-1/2" |
Control Sensor Cable | 30' 5", 25', 2 Conductor, 24 AWG, Shielded Cable |
Control Sensor "Rough In" Cut Out | 3/8" Diameter |
Generator Control Connection | 6 Position Terminal Block |
Generator Control Cable | 6" Long, 4 Conductors, 16 AWG |
Width | 24" |
Depth | 33" |
Height | 44" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Mr.Steam C2500
CU Series 60kW Steam Shower Generator Package w/CU2500
The Mr.Steam C2500 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 2500 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 60kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, Solenoid Valve, and Auxiliary Manual Reset.
See Shipping Tab
C2500 Club Generator
- Sight glass
- Standard with full 1" drain port
- Stainless steel jacket
- Compact vertical design
- Durable electronic components
- Features National Board registered pressure vessel
- Use high quality fibrous glass pressure vessel insulation for maximum energy performance
- Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
- Steam-rated operating and high limit pressure controls for Steam-On-Demand
- Pressure gauge and sight glass to provide operating information at a glance
- Easy installation and service accessibility
- Meet ASME requirements and UL/CSA nationally recognized testing standards
Digital 1 Control
- Steam room temperature regulating sensor
- Advanced low-mass, quick response thermistor with sensor guard
- Durable and capable of responding to steam room temperature within tight tolerances
- Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4X4 electrical box
- Allows owner/operator to set room temperature accurately and reliably
- Providing efficient, consistent control with full 100˚ F - 120˚ F range
- Integrated in-steam room high temperature control provides an additional level of reliability
Steam Solenoid Valves (2)
- All brass construction with stainless steel trim, sized to match steamhead distribution
- Steam-rated seat for high reliability and quick response steam delivery
Aromasteam Steamheads (2)
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr. Steam's AromaFlo aromatic oil delivery system
Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
Auxiliary Manual Reset
- Independent manual reset
- Backup low water cutoff control
- Steam bath generator 33"L x 24"W x 44"H
- Installation and operation manual
- Limited warranty
Model | C2500 |
---|---|
Minimum Cubic Feet | 2001 CF |
Maximum Cubic Feet | 2500 CF |
Kilowatt Rating | 60KW |
Shipping Weight | 350 lbs |
Water Supply Connection | 1/2" NPT |
Generator Steam Line Connection | 1"NPT |
Steam Head Connection | 3/4" NPT |
Drain Connection | 1" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control "Rough In" Cut Out | 3-1/2" x 3-1/2" |
Control Sensor Cable | 30' 5", 25', 2 Conductor, 24 AWG, Shielded Cable |
Control Sensor "Rough In" Cut Out | 3/8" Diameter |
Generator Control Connection | 6 Position Terminal Block |
Generator Control Cable | 6" Long, 4 Conductors, 16 AWG |
Width | 24" |
Depth | 33" |
Height | 44" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Mr.Steam C3000
CU Series 72kW Steam Shower Generator Package w/CU3000
The Mr.Steam C3000 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 3000 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 72kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, Solenoid Valve, and Auxiliary Manual Reset.
See Shipping Tab
C3000 Club Generator
- Sight glass
- Standard with full 1" drain port
- Stainless steel jacket
- Compact vertical design
- Durable electronic components
- Features National Board registered pressure vessel
- Use high quality fibrous glass pressure vessel insulation for maximum energy performance
- Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
- Steam-rated operating and high limit pressure controls for Steam-On-Demand
- Pressure gauge and sight glass to provide operating information at a glance
- Easy installation and service accessibility
- Meet ASME requirements and UL/CSA nationally recognized testing standards
Digital 1 Control
- Steam room temperature regulating sensor
- Advanced low-mass, quick response thermistor with sensor guard
- Durable and capable of responding to steam room temperature within tight tolerances
- Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4X4 electrical box
- Allows owner/operator to set room temperature accurately and reliably
- Providing efficient, consistent control with full 100˚ F - 120˚ F range
- Integrated in-steam room high temperature control provides an additional level of reliability
Steam Solenoid Valves (2)
- All brass construction with stainless steel trim, sized to match steamhead distribution
- Steam-rated seat for high reliability and quick response steam delivery
Aromasteam Steamheads (2)
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr. Steam's AromaFlo aromatic oil delivery system
Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
Auxiliary Manual Reset
- Independent manual reset
- Backup low water cutoff control
- Steam bath generator 33"L x 24"W x 44"H
- Installation and operation manual
- Limited warranty
Model | C3000 |
---|---|
Minimum Cubic Feet | 2501 CF |
Maximum Cubic Feet | 3000 CF |
Kilowatt Rating | 72 KW |
Shipping Weight | 400 lbs |
Water Supply Connection | 1/2" NPT |
Generator Steam Line Connection | 1" NPT |
Steam Head Connection | 3/4" NPT |
Drain Connection | 1" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control "Rough In" Cut Out | 3-1/2" x 3-1/2" |
Control Sensor Cable | 30' 5", 25', 2 Conductor, 24 AWG, Shielded Cable |
Control Sensor "Rough In" Cut Out | 3/8" Diameter |
Generator Control Connection | 6 Position Terminal Block |
Generator Control Cable | 6" Long, 4 Conductors, 16 AWG |
Width | 24" |
Depth | 33" |
Height | 44" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Mr.Steam C4500
CU Series 108kW Steam Shower Generator Package w/CU4500
The Mr.Steam C4500 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 4500 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 108kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, Solenoid Valve, and Auxiliary Manual Reset.
See Shipping Tab
C4500 Club Generator
- Sight glass
- Standard with full 1" drain port
- Stainless steel jacket
- Compact vertical design
- Durable electronic components
- Features National Board registered pressure vessel
- Use high quality fibrous glass pressure vessel insulation for maximum energy performance
- Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
- Steam-rated operating and high limit pressure controls for Steam-On-Demand
- Pressure gauge and sight glass to provide operating information at a glance
- Easy installation and service accessibility
- Meet ASME requirements and UL/CSA nationally recognized testing standards
Digital 1 Control
- Steam room temperature regulating sensor
- Advanced low-mass, quick response thermistor with sensor guard
- Durable and capable of responding to steam room temperature within tight tolerances
- Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4X4 electrical box
- Allows owner/operator to set room temperature accurately and reliably
- Providing efficient, consistent control with full 100˚ F - 120˚ F range
- Integrated in-steam room high temperature control provides an additional level of reliability
Steam Solenoid Valves (2)
- All brass construction with stainless steel trim, sized to match steamhead distribution
- Steam-rated seat for high reliability and quick response steam delivery
Aromasteam Steamheads (2)
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr.Steam's AromaFlo aromatic oil delivery system
Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
Auxiliary Manual Reset
- Independent manual reset
- Backup low water cutoff control
- Steam bath generator 34"L x 28"W x 59"H
- Installation and operation manual
- Limited warranty
Model | C4500 |
---|---|
Minimum Cubic Feet | 3001 CF |
Maximum Cubic Feet | 4500 CF |
Kilowatt Rating | 108 KW |
Shipping Weight | 625 lbs |
Water Supply Connection | 1/2" NPT |
Generator Steam Line Connection | 1-1/2" NPT |
Steam Head Connection | 3/4" NPT |
Drain Connection | 1" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control "Rough In" Cut Out | 3-1/2" x 3-1/2" |
Control Sensor Cable | 30' 5", 25', 2 Conductor, 24 AWG, Shielded Cable |
Control Sensor "Rough In" Cut Out | 3/8" Diameter |
Generator Control Connection | 6 Position Terminal Block |
Generator Control Cable | 6" Long, 4 Conductors, 16 AWG |
Width | 28" |
Depth | 34" |
Height | 59" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Mr.Steam C0360
CU Series 9kW Steam Shower Generator Package w/CU360
The Mr.Steam C0360 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms of up to 400 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 9kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, Solenoid Valve, and Auxiliary Manual Reset Low Water Cutoff. While steam bathers receive a peaceful escape, owners and operators get peace of mind.
See Shipping Tab
CU 9kW Generator
- Sight glass
- Standard with full 1" drain port
- Stainless steel jacket
- Compact vertical design
- Durable electronic components
- Features national board registered pressure vessel
- Use high quality fibrous glass pressure vessel insulation for maximum energy performance
- Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
- Steam-rated operating and high limit pressure controls for steam-on-demand
- Pressure gauge and sight glass to provide operating information at a glance
- Easy installation and service accessibility
- Meet ASME requirements and UL/CSA nationally recognized testing standards
Digital 1 Control
- Steam room temperature regulating sensor
- Advanced low-mass, quick response thermistor with sensor guard
- Durable and capable of responding to steam room temperature within tight tolerances
- Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4x4 electrical box
- Allows owner/operator to set room temperature accurately and reliably
- Providing efficient, consistent control with full 100°F - 120°F range
- Integrated in-steam room high temperature control provides an additional level of reliability
CU Steamhead
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with ful coverage polycarbonate cover
- Engineered to operate seamlessly with aromaflo aromatic oil delivery system
Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital timer provides 24/7 startup/shutdown and autoflush operation
- Auxiliary manual reset
- Independent manual reset
- Backup low water cutoff control
Solenoid Valve
- All brass construction with stainless steel trim, sized to match steamhead distribution
- Steam-rated seat for high reliability and quick response steam delivery
- CU 9kW Generator
- Digital 1 Control
- CU Steamhead
- Automatic Blowdown System
- Solenoid Valve
- Auxiliary Manual Reset Low Water Cutoff
- Installation and Operation Manual
- UL/cUL Listed and CE Approved
- Limited Warranty
Model | C0360 |
---|---|
Minimum Cubic Feet | 201 |
Maximum Cubic Feet | 400 |
Kilowatt Rating (kW) | 9kW |
Shipping Weight | 250 lbs |
Water Supply Connection | 1/4" NPT |
Generator Steam Line Connection | 1" NPT |
Steam Head Connection | 3/4" NPT |
Drain Connection | 1" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control 'Rough In' Cut Out | 3-1/2" x 3-1/2" |
Control Sensor Cable | 30' 5', 25', 2 Conductor, 24 AWG, Shielded Cable |
Control Sensor 'Rough In' Cut Out | 3/8" Diameter |
Generator Control Connection | 6 Position Terminal Block |
Generator Control Cable | 6' Long, 4 Conductors, 16 AWG |
Width | 20" |
Depth | 30" |
Height | 38" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Mr.Steam C0500
CU Series 12kW Steam Shower Generator Package w/CU500
The Mr.Steam C0500 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 500 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 12kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, and Solenoid Valve.
See Shipping Tab
CO500 Club Generator
- Sight glass
- Standard with full 1" drain port
- Stainless steel jacket
- Compact vertical design
- Durable electronic components
- Features National Board registered pressure vessel
- Use high quality fibrous glass pressure vessel insulation for maximum energy performance
- Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
- Steam-rated operating and high limit pressure controls for Steam-On-Demand
- Pressure gauge and sight glass to provide operating information at a glance
- Easy installation and service accessibility
- Meet ASME requirements and UL/CSA nationally recognized testing standards
Digital 1 Control
- Steam room temperature regulating sensor
- Advanced low-mass, quick response thermistor with sensor guard
- Durable and capable of responding to steam room temperature within tight tolerances
- Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4X4 electrical box
- Allows owner/operator to set room temperature accurately and reliably
- Providing efficient, consistent control with full 100Ëš F - 120Ëš F range
- Integrated in-steam room high temperature control provides an additional level of reliability
Steam Solenoid Valve
- All brass construction with stainless steel trim, sized to match steamhead distribution
- Steam-rated seat for high reliability and quick response steam delivery
Aromasteam Steamhead
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr.Steam's AromaFlo aromatic oil delivery system
Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
- Auxiliary Manual Reset
- Independent manual reset
- Backup low water cutoff control
- Steam bath generator 30"L x 20"W x 38"H
- Installation and operation manual
- Limited warranty
Model | C0500 |
---|---|
Minimum Cubic Feet | 401 CF |
Maximum Cubic Feet | 500 CF |
Kilowatt Rating (kW) | 12 kW |
Shipping Weight (Lbs.) | 250 lbs |
Water Supply Connection | 1/4" NPT |
Generator Steam Line Connection | 1" NPT |
Steam Head Connection | 3/4" NPT |
Drain Connection | 1" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control 'Rough In' Cut Out | 3-1/2" x 3-1/2" |
Control Sensor Cable | 30' 5', 25', 2 Conductor, 24 AWG, Shielded Cable |
Control Sensor 'Rough In' Cut Out | 3/8" Diameter |
Generator Control Connection | 6 Position Terminal Block |
Generator Control Cable | 6' Long, 4 Conductors, 16 AWG |
Width In Inches | 20" |
Depth In Inches | 30" |
Height In Inches | 38" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Mr.Steam C0750
CU Series 18kW Steam Shower Generator Package w/CU750
The Mr.Steam C0750 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 750 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 18kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, and Solenoid Valve.
See Shipping Tab
C0750 Club Generator
- Sight glass
- Standard with full 1" drain port
- Stainless steel jacket
- Compact vertical design
- Durable electronic components
- Features National Board registered pressure vessel
- Use high quality fibrous glass pressure vessel insulation for maximum energy performance
- Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
- Steam-rated operating and high limit pressure controls for Steam-On-demand
- Pressure gauge and sight glass to provide operating information at a glance
- Easy installation and service accessibility
- Meet ASME requirements and UL/CSA nationally recognized testing standards
Digital 1 Control
- Steam room temperature regulating sensor
- Advanced low-mass, quick response thermistor with sensor guard
- Durable and capable of responding to steam room temperature within tight tolerances
- Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4X4 electrical box
- Allows owner/operator to set room temperature accurately and reliably
- Providing efficient, consistent control with full 100° F - 120° F range
- Integrated in-steam room high temperature control provides an additional level of reliability
Steam Solenoid Valve
- All brass construction with stainless steel trim, sized to match steamhead distribution
- Steam-rated seat for high reliability and quick response steam delivery
Aromasteam Steamhead
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr.Steam's AromaFlo aromatic oil delivery system
Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
- Auxiliary Manual Reset
- Independent manual reset
- Backup low water cutoff control
- Steam bath generator 30"L x 20"W x 38"H
- Installation and operation manual
- Limited warranty
Model | C0750 |
---|---|
Minimum Cubic Feet | 501 CF |
Maximum Cubic Feet | 750 CF |
Kilowatt Rating (kW) | 18 kW |
Shipping Weight (Lbs.) | 250 lbs |
Water Supply Connection | 1/4" NPT |
Generator Steam Line Connection | 1" NPT |
Steam Head Connection | 3/4" NPT |
Drain Connection | 1" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control 'Rough In' Cut Out | 3-1/2" x 3-1/2" |
Control Sensor Cable | 30' 5', 25', 2 Conductor, 24 AWG, Shielded Cable |
Control Sensor 'Rough In' Cut Out | 3/8" Diameter |
Generator Control Connection | 6 Position Terminal Block |
Generator Control Cable | 6' Long, 4 Conductors, 16 AWG |
Width In Inches | 20" |
Depth In Inches | 30" |
Height In Inches | 38" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Lattner 30AF
SteamEase Series 30.0kW Electric Steam Bath Boiler
Lattner 30AF, Electric Steam Bath Boiler, is engineered to power rooms up to 1200 cubic feet (CF).
Includes digital operating control package for single or dual room application (select below).
See Shipping Tab
The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet.
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project's success.
Mr.Steam C1250
CU Series 30kW Steam Shower Generator Package w/CU1250
The Mr.Steam C1250 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 1250 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 30kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, and Solenoid Valve.
See Shipping Tab
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr. Steam's AromaFlo aromatic oil delivery system
- Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
- Auxiliary Manual Reset
- Independent manual Reset
- Back low water cutoff control
- Steam bath generator 30"L x 20"W x 38"H
- Steam Bath Generator 30"L x 20"W x 38"H
- Installation and Operation Manual
- Limited Warranty
Model | C1250 |
---|---|
Minimum Cubic Feet | 1001 CF |
Maximum Cubit Feet | 1250 CF |
Kilowatt Rating (kW) | 30 kW |
Shipping Weight (Lbs.) | 250 lbs |
Water Supply Connection | 1/4" NPT |
Generator Steam Line Connection | 1" NPT |
Steam Head Connection | 3/4" NPT |
Drain Connection | 1" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control 'Rough In' Cut Out | 3-1/2" x 3-1/2" |
Control Sensor Cable | 30' 5'.25' 2 Conductor, 24 AWG, Shielded Cable |
Control Sensor 'Rough In' Cut Out | 3/8" Diameter |
Generator Control Connection | 6 Position Terminal Block |
Generator Control Cable | 6' Long, 4 Conductors, 16 AWG |
Width In Inches | 20" |
Depth In Inches | 30" |
Height In Inches | 38" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.