Installing a steam shower for your club or spa is much easier when you have all the necessary components. Our selection of shower installation materials provides the ability to make the entire shower construction process run seamlessly. SteamSaunaBath has all the materials required to ensure the quality of your facility’s steam bath.
Steamist HC-STD3
Boiler Stand for HC-9 to HC-18 Boilers
Designed for use with HC-9 to HC-18 boilers, this mounting stand raises the steam generator for both safety and comfort during maintenance and repair.
- For use with HC-9 to HC-18 boilers
- Measures 20"L x 10.5"W x 24"H
- Steamist® Stand for use with HC Series Steam Generator
Model: | HC-STD3 |
---|---|
Length: | 20 in. |
Width: | 10.5 in. |
Height: | 24 in. |
Weight: | 23.4 lbs |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Steamist HC-STD7
Boiler Stand for HC-24 to HC-72 Boilers
Designed for use with HC-24 to HC-72 boilers, this mounting stand raises the steam generator for both safety and comfort during maintenance and repair.
- For use with HC-24 to HC-72 boilers
- Measures 14"L x 25-1/2"W x 24"H
- Steamist® Stand for use with HC Series Steam Generator
Model: | HC-STD7 |
---|---|
Length: | 25.5 in. |
Width: | 14 in. |
Height: | 24 in. |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Mr. Steam CU99331C
Transformer, Control Voltage, 208/240V To 120V
The step-down transformer is used to supply the 120V control circuit.
- Transforms 208V or 240V operating voltage to 120V control circuit voltage
- 1/4" KVA Transformer
- Recommended where 120 control voltage may be difficult to obtain
Model | CU99331C |
---|---|
Shipping Weight | 14 lbs |
Mr.Steam CU99331F
Transformer, Control Voltage, 480V To 120V
The step-down transformer is used to supply the 120V control circuit.
- Transforms 480V operating voltage to 120V control circuit voltage
- 1/4" KVA Transformer
- Recommended where 120 control voltage may be difficult to obtain
Model | CU99331F |
---|---|
Shipping Weight | 14 lbs |
Steam Sauna Living SSL-T512
Boiler Mounting Stand II
This mounting stand raises the steam generator to the optimal service height for both safety and comfort, during maintenance and repair.
400LB Maximum Weight
- Raises steam generator to optimal service height for safety and comfort during maintenance/repair
- Allows for mopping/sweeping to help keep equipment room clean
- All metal construction
- Aluminum slotted deck
- 400 Lb. capacity
- Mounting platform measures 21-3/4" square
- Square leg base measures 23-3/4" square
- 12" high
Model | SSL-T512 |
---|---|
Width In Inches | 21-3/4" |
Depth In Inches | 21-3/4" |
Height In Inches | 12" |
Shipping Weight (Lbs.) | 10 lbs |
Bathology RB 310
Steam Room Temperature Sensor Guard, 2" x 5"
A sensor tampering cure and more by Bathology!
Expect consistent and reproducible steam bathing temperatures when installing the RB 310 Steam Room Temperature Sensor Guard.
.
- Elegant 4B brushed stainless finish
- Sensor isolation mount
- Rugged 18 gauge stainless steel construction
- Small-scale, low profile design
- Stainless steel fasteners
- Progressive beveling and integral air slots
- Universal sensor installation
- Consistent and reproducible bathing experiences
- Enhanced sensor accuracy
- Well-balanced bathing environment
- Reduces sensor tampering
- Near-permanent installation
- Sensor guard, stainless steel, 5-1/8”W x 2-3/8”H x 1-1/4”D
- (3) Solid wall anchors with anti-rotation fins, AF5 Alligator, flangeless, full length extrusion
- (3) Stainless steel sheet metal screws, Phillips 1" #6 Pan, Type A point, thread size 18
- Sensor screw mount
- Sensor tie
- RTV silicone sealant, .5 oz tube
- Mounting template
- Installation and operation manual
Model | RB 310 |
---|---|
Shipping Weight | 2 lbs |
Material | 18 gauge stainless steel, brushed 4B finish |
Width | 5-1/8" |
Height | 2-3/8" |
Depth | 1-1/4" |
Bathology RB 320
Steam Room Temperature Sensor Guard, 6" x 9"
A sensor tampering cure and more…by Bathology!
Expect consistent and reproducible steam bathing temperatures when installing the RB 320 Steam Room Temperature Sensor Guard.
- Elegant 4B brushed stainless finish
- Sensor isolation mount
- Rugged 18 gauge stainless steel construction
- Progressive beveling and integral air slots
- Universal sensor installation
- Consistent and reproducible bathing experiences
- Enhanced sensor accuracy
- Well-balanced bathing environment
- Reduces sensor tampering
- Low profile design
- Stainless steel fasteners
- Near permanent installation
- Sensor guard, stainless steel, 6-1/8"W x 9-1/4"H x 2"D
- (5) Solid wall anchors with anti-rotation fins, AF5 Alligator, flangeless, full length extrusion
- (5) Stainless steel sheet metal screws, Phillips 1" #6 Pan, Type A point, thread size 18
- Sensor screw mount
- Sensor tie
- RTV silicone sealant, .5 oz tube
- Mounting template
- Installation and operation manual
Model | RB 320 |
---|---|
Shipping Weight | 3 lbs |
Materials | 18 gauge stainless steel, brushed 4B finish |
Width | 6-1/8" |
Depth | 2" |
Height | 9-1/4" |
GENPAN-XL
Generator Pan
Designed for use with 20-30kw units in the unlikely event of a slow water leak.
- Galvanized material
- Solid brass drain connection
- Integral generator support
- Measures 14"W x 24"L x 2"H
- Generator Pan XL
Model | GENPAN-XL |
---|---|
Material | Galvanized |
Connections | 3/4" MGHT male threaded NPT and 1/2" NPT female brass connection |
Width | 14" |
Length | 24" |
Height | 2" |
ThermaSol RIK-MTSQ
Rough in Kit, MicroTouch Control - Square
The RIK-MTSQ rough-in mounting kit includes a mud ring for the MicroTouch square control, steam head rough-in bell housing, bell housing installation tool and a 50-foot data link cable.
- Rough-in mounting kit
- mud ring for the MicroTouch square control
- steam head rough in bell housing
- bell housing installation tool
- 50-foot data link cable
Model | RIK-MTSQ |
---|---|
Control | MicroTouch Square Control |
Bell Housing Installation Tool Included | Yes |
Data Link Cable Size | 50' |
ThermaSol RIK-SMTRD
Rough in kit, MicroTouch Control-Round
The RIK-SMTRD rough-in mounting kit includes a mud ring for the MicroTouch round control, steam head rough-in bell housing, bell housing installation tool and a 50-foot data link cable.
- Rough-in mounting kit
- mud ring for the MicroTouch round control
- steam head rough-in bell housing
- bell housing installation tool
- 50-foot data link cable
Model | RIK-SMTRD |
---|---|
Control | MicroTouch & Signature Round |
Bell Housing Installation Tool Included | Yes |
Data Link Cable Size | 50' |