Steam & Sauna Buyer's Club

 

SteamSaunaBath offers a variety of products to enhance the safety of bathers visiting your commercial steam shower. Browse through our selection of digital steam thermometers, temperature sensor guards, steam room warning signs, and support bars to ensure a risk-free experience for your members.

Accurate Industries SSL-T504
Support Bars
Price
MSRP
$43.15
Your Price
$30.21
Price
MSRP
$53.95
Your Price
$37.77
Price
MSRP
$64.75
Your Price
$45.33
Price
MSRP
$75.55
Your Price
$52.89
Price
MSRP
$86.35
Your Price
$60.45
Accurate Industries SSL-T509
Non-Slip Adhesive Strips
Price
MSRP
$64.75
Your Price
$45.33
Price
MSRP
$75.55
Your Price
$52.89
Price
MSRP
$86.35
Your Price
$60.45
Amerec 7200-224
Heater Guard, Cedar, 23" X 16" X 11"D, 2-Sided, for DSNR Series
Price
MSRP
$72.00
Your Price
$50.40
Mr. Steam CU Alarm
Temperature Alarm, CU Series, Mr. Steam
Price
MSRP
$250.00
Your Price
$200.00
Bathology PreciseTemp 320
Digital Steam/Sauna Room Thermometer
Price
MSRP
$330.00
Your Price
$231.00
Price
MSRP
$320.00
Your Price
$224.00
Mr.Steam CU SteamStop
Stop Switch, CU Series
Price
MSRP
$455.00
Your Price
$364.00
Steamist TA-100
Programmable Steamroom Temperature Alert
Price
MSRP
$1,000.00
Your Price
$700.00

Amerec 7200-224

Heater Guard, Cedar, 23" X 16" X 11"D, 2-Sided, for DSNR Series

Model
7200-224
SKU
7200-224

Heater Guard Rails are constructed of 1”x 4” (5/8” x 3-1/2” net) S4S, kiln dried, all heart Western Red cedar fasciae attached to 1” x 1” (5/8” x 3-1/2” net) cedar supports.

MSRP
$72.00
Your Price
$50.40
Swipe horizontally to reveal full table content.
Model 7200-224
Shipping Weight 15 lbs

Steamist TA-100

Programmable Steamroom Temperature Alert

Model
TA-100
SKU
68016
UPC
787924007208

Steamist's TA-100 Programmable Steamroom Temperature Alert helps ensure the safety and comfort of member bathers. Designed for use with Steamist HC series steam bath generators in health clubs, hotels, and spas.

MSRP
$1,000.00
Your Price
$700.00
  • Digital Temperature Display
  • Built-in audible alarm
  • Secondary auxiliary alarm available
  • Selectable Fahrenheit/Celsius
  • Adjustable alarm from 100F to 194F
  • Tamper-proof lock feature
  • 12 volt UL Class II power supply
  • 5A output relay to interrupt heater when the alarm sounds
  • Temperature must cool below the maximum allowed temperature before the reset button will disarm the alarm
  • Test button
  • HC model generators built with DCCP control since 2013 are prewired to accept the TA-100 and provides 12 volt power required
  • Installs outside the steam room
  • TA-100 Temperature Alert
  • Temperature Sensor
  • Auxiliary Alarm
  • Installation and operation manual
Swipe horizontally to reveal full table content.
Model TA-100
AC Voltage 12V AC
Wire Size Heater Interrupt Relay 4-conductor 22AWG
Temperature Sensor 2-conductor 22AWG
Auxiliary Alarm 2-conductor 22AWG
Dimensions 6-1/2"W x 7"H x 1-3/4"D

Mr. Steam CU Alarm

Temperature Alarm, CU Series, Mr. Steam

Model
CU Alarm
SKU
CUALARM
UPC
767931701191

This audible alarm sounds in the event the steam room maximum set temperature is exceeded or the CU SteamStop switch is pressed.

MSRP
$250.00
Your Price
$200.00
  • Mounts in standard 4x4 electrical box
  • Eight alarm tones
  • Two alarm volumes
  • Outside the steam shower installation
  • Installation and operation manual
  • Manufacturer's Warranty
Swipe horizontally to reveal full table content.
Model CU Alarm
Shipping Weight 5 lbs
AC Voltage 115V AC

Mr.Steam CU SteamStop

Stop Switch, CU Series

Model
CU SteamStop
SKU
CU-STEAMSTOP
UPC
767931701184

This CU SteamStop emergency stop switch electronically shuts down the steam generator and initiates the Digital 1 internal alarm and the CU Alarm, if installed.

MSRP
$455.00
Your Price
$364.00
  • Electronically shuts down generator
  • Multiple switches can be used with one generator
  • Works with Digital 1 or F1 operating control
  • Initiates Digital 1 internal alarm
  • Initiates CU Alarm, if installed
  • Inside/Outside steam room installation
  • Steam Stop button
  • 30' Low voltage wire
  • Installation and operation manual
  • Limited warranty
Swipe horizontally to reveal full table content.
Model CU SteamStop
Shipping Weight 5 lbs

Accurate Industries SSL-T504

Support Bars

Model
SSL-T504
SKU
21529

Accurate Industries SSL-T504 Support Bars

MSRP
$43.15
Your Price
$30.21
  • Provide a sure handhold to assist in preventing accidents
  • Durable, chrome-plated finish
  • Easy to clean
  • Vertical or horizontal mounting

Accurate Industries SSL-T509

Non-Slip Adhesive Strips

Model
SSL-T509
SKU
4210-1

Designed to gain traction where there is a potential for slipping, non-slip water-proof strips are for use on steam room flooring or bottom benching. Available in 1", 2" and 3" widths, these grit impregnated non-slip clear strips utilize superior adhesive backing and are packaged in 60' rolls allowing for custom-cut use.

MSRP
$64.75
Your Price
$45.33
  • For use on steam room flooring or bottom benching
  • Designed to gain traction where there is potential for slipping
  • Available in 1", 2", and 3" widths
  • Superior adhesive backing
  • Packaged in 60' rolls allowing for custom-cut use
Swipe horizontally to reveal full table content.
Model SSL-T509
Width In Inches 1", 2", and 3"

Bathology PreciseTemp 320

Digital Steam/Sauna Room Thermometer

Model
PRECISETEMP320S

One-of-a-kind digital thermometer by Bathology!

The Bathology PreciseTemp 320 Digital Steam/Sauna Room Thermometer is designed to simplify steam and sauna room operation and provide bathers the information they need to make informed decisions regarding the environments they bathe in.

MSRP
$330.00
Your Price
$231.00
  • Solar powered
  • Battery back-up circuit
  • Small-scale design
  • Digits height is .4"
  • Stainless steel body
  • Stainless steel fasteners
  • + Or – 1 degree accuracy
  • Fahrenheit or Celsius readout
  • Range is -52 degrees F to 320 degrees F
  • Small-scale, low profile stainless steel sensor guard
  • 96” Sensor tether
  • Bather education prior to entry
  • Walk-by operator monitoring
  • Reduced liability
  • Time savings for attendants and operators
  • Facilitates environment troubleshooting
  • Promotes environment operating temperature standards
  • Simplifies women’s locker bathing environment troubleshooting
  • Digital Thermometer with tethered sensor, 3-1/2" diameter
  • Sensor guard, stainless steel, 5-1/8”W x 2-3/8”H x 1-1/4”D
  • (3) Solid wall anchors with anti-rotation fins, AF5 Alligator, flangeless, full length extrusion
  • (3) Stainless steel sheet metal screws, Phillips 1" #6 Pan, Type A point, thread size 18
  • Sensor screw mount
  • Sensor tie
  • RTV silicone sealant, .5 oz tube
  • Mounting template
  • Installation and operation manual
Swipe horizontally to reveal full table content.
Model PreciseTemp 320
Shipping Weight 5 lbs
Material Stainless steal body with clear plastic face
Depth 1"
Diameter 3-1/2"
Sensor Cable 96" Tethered (non-spliceable)
Sensor Guard Dimensions 5-1/8" W x 1-1/4"D x 2-3/8"H
Battery G-13A, 1.5V, Button Cell