Lattner 24AF
SteamEase Series Electric Steam Bath Boiler, 24KW
Lattner 24AF, Electric Steam Bath Boiler, is engineered to power rooms up to 960 cubic feet (CF). Includes digital operating control package for single or dual room application (select below). The Lattner Steamease AF series includes 1 steam head per room.
See Shipping Tab
- Industrial grade incoloy heating elements
- Fully insulated shell with metal jacket
- Automatic operating controls
- ASME low-pressure operation compliance
- National Board registered vessel
- Room hi-limit pressure control
- Operates with digital room temperature controller
- Operating, electronic hi-limit and ASME safety valve pressure control system
- Safety valve
- Blowdown valves for boiler and level control
- On/off switch and terminals for connection of feed water equipment
- UL listed and built to ASME code
- 24AF, 24BF, 24CF, or 24F Steam Boiler
- Digital room temperature controller, single or dual
- One (1) waterproof sensor with shield per room
- One (1) factory-wired steam solenoid valve assembly per room
- One (1) steam head per room
Model | 24AF |
---|---|
Minimum Adjusted Cubic Feet | 720 |
Maximum Adjusted Cubic Feet | 960 |
Kilowatt Rating | 24 KW |
Shipping Weight | 445 lbs |
AC Voltage | 208V AC |
Phase | 3 Phase |
Nominal Amperage | 66.7 Amps |
Water Supply Connection | 3/4" NPT |
Generator Steam Line Connection | 1" NPT |
Length | 38" |
Width | 27" |
Height | 29" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project's success.
Lattner 36AF
SteamEase Series Electric Steam Bath Boiler, 36KW
Lattner 36AF, Electric Steam Bath Boiler, is engineered to power rooms up to 600 cubic feet (CF). Includes digital operating control package for single or dual room application (select below). The Lattner Steamease AF series includes 1 steam head per room.
See Shipping Tab
- Industrial grade incoloy heating elements
- Fully insulated shell with metal jacket
- Automatic operating controls
- ASME low-pressure operation compliance
- National Board registered vessel
- Room hi-limit pressure control
- Operates with digital room temperature controller
- Operating, electronic hi-limit and ASME safety valve pressure control system
- Safety valve
- Blowdown valves for boiler and level control
- On/off switch and terminals for connection of feed water equipment
- UL listed and built to ASME code
- 36AF, 36BF, 36CF, or 36F Steam Boiler
- Digital room temperature controller, single or dual
- One (1) waterproof sensor with shield per room
- One (1) factory-wired steam solenoid valve assembly per room
- One (1) steam head per room
Model | 36AF |
---|---|
Minimum Adjusted Cubic Feet | 1200 |
Maximum Adjusted Cubic Feet | 1440 |
Kilowatt Rating | 36 KW |
Shipping Weight | 500 lbs |
AC Voltage | 208V AC |
Phase | 3 Phase |
Nominal Amperage | 100 Amps |
Water Supply Connection | 3/4" NPT |
Generator Steam Line Connection | 1-1/4" NPT |
Length | 43" |
Width | 29" |
Height | 29" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project's success.
Lattner 48AF
SteamEase Series Electric Steam Bath Boiler, 48KW
Lattner 48AF, Electric Steam Bath Boiler, is engineered to power rooms up to 1,920 cubic feet (CF). Includes digital operating control package for single or dual room application (select below). The Lattner Steamease AF series includes 1 steam head per room.
See Shipping Tab
- Industrial grade incoloy heating elements
- Fully insulated shell with metal jacket
- Automatic operating controls
- ASME low-pressure operation compliance
- National Board registered vessel
- Room hi-limit pressure control
- Operates with digital room temperature controller
- Operating, electronic hi-limit and ASME safety valve pressure control system
- Safety valve
- Blowdown valves for boiler and level control
- On/off switch and terminals for connection of feed water equipment
- UL listed and built to ASME code
- 48AF Steam Boiler
- Digital room temperature controller, single or dual
- One (1) waterproof sensor with shield per room
- One (1) factory-wired steam solenoid valve assembly per room
- One (1) steam head per room
Model | 48AF |
---|---|
Minimum Adjusted Cubic Feet | 1440 |
Maximum Adjusted Cubic Feet | 1920 |
Kilowatt Rating | 48 KW |
Shipping Weight | 650 lbs |
AC Voltage | 208V AC |
Phase | 3 Phase |
Nominal Amperage | 133.4 Amps |
Water Supply Connection | 3/4" NPT |
Generator Steam Line Connection | 1-1/4" NPT |
Length | 43" |
Width | 29" |
Height | 32" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project's success.
Lattner 15AF
SteamEase Series Electric Steam Bath Boiler, 15KW, 208V, 3PH
Lattner 15AF, Electric Steam Bath Boiler, is engineered to power rooms up to 600 cubic feet (CF). Includes digital operating control package for single or dual room application (select below). The Lattner Steamease AF series includes 1 steam head per room.
See Shipping Tab
- Industrial grade incoloy heating elements
- Fully insulated shell with metal jacket
- Automatic operating controls
- ASME low-pressure operation compliance
- National Board registered vessel
- Room hi-limit pressure control
- Operates with digital room temperature controller
- Operating, electronic hi-limit and ASME safety valve pressure control system
- Safety valve
- Blowdown valves for boiler and level control
- On/off switch and terminals for connection of feed water equipment
- UL listed and built to ASME code
- 15AF, 15BF, 15CF, or 15F Steam Boiler
- Digital room temperature controller, single or dual
- One (1) waterproof sensor with shield per room
- One (1) factory-wired steam solenoid valve assembly per room
- One (1) steam head per room
Model | 15AF |
---|---|
Minimum Adjusted Cubic Feet | 360 |
Maximum Adjusted Cubic Feet | 600 |
Kilowatt Rating | 15 KW |
Shipping Weight | 400 lbs |
AC Voltage | 208V AC |
Phase | 3 Phase |
Nominal Amperage | 41.7 Amps |
Recommended Protective Device | 50 Amp |
Water Supply Connection | 3/4" NPT |
Generator Steam Line Connection | 3/4" NPT |
Length | 43" |
Width | 27" |
Height | 29" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project's success
.
Lattner 18AF
SteamEase Series Electric Steam Bath Boiler, 18KW, 208V, 3PH
Lattner 18AF, Electric Steam Bath Boiler, is engineered to power rooms up to 720 cubic feet (CF). Includes digital operating control package for single or dual room application (select below). The Lattner Steamease AF series includes 1 steam head per room.
See Shipping Tab
- Industrial grade incoloy heating elements
- Fully insulated shell with metal jacket
- Automatic operating controls
- ASME low-pressure operation compliance
- National Board registered vessel
- Room hi-limit pressure control
- Operates with digital room temperature controller
- Operating, electronic hi-limit and ASME safety valve pressure control system
- Safety valve
- Blowdown valves for boiler and level control
- On/off switch and terminals for connection of feed water equipment
- UL listed and built to ASME code
- 18AF, 18BF, 18CF, or 18F Steam Boiler
- Digital room temperature controller, single or dual
- One (1) waterproof sensor with shield per room
- One (1) factory-wired steam solenoid valve assembly per room
- One (1) steam head per room
Model | 18AF |
---|---|
Minimum Adjusted Cubic Feet | 600 |
Maximum Adjusted Cubic Feet | 720 |
Kilowatt Rating | 18 KW |
Shipping Weight | 400 lbs |
AC Voltage | 208V AC |
Phase | 3 Phase |
Nominal Amperage | 50 Amps |
Recommended Protective Device | 60 Amp |
Water Supply Connection | 3/4" NPT |
Generator Steam Line Connection | 3/4" NPT |
Length | 43" |
Width | 27" |
Height | 29" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project's success
.
Thermasol PP18SR
PowerPak Series 18kW Steam Shower Generator
The ThermaSol PowerPak PP18SR is an 18kW small-room commercial steam shower generator designed for health club steam rooms up to 1000 cubic feet (CF). Thermasol has designed this with durability in mind by using a split tank design it enhances performance and lifespan.
See Shipping Tab
- Delivered fully assembled
- Split tank design
- Can be located up to 50 feet from steam room
- No additional drain line required
- Stainless steel tank
- Corrosion resistance Incoloy heating elements
- All access from and top panel
- 18 month parts and labor warranty
- PowerPak Series Generator
- Temperature Sensor & 50' lead wire
- Polished Chrome Steam head
- Digital Timer & M8 cable
- Warranty
Model | PP18SR-240 |
---|---|
Input Voltage | 208-240VAC, 3-Phase |
Kilowatt Rating | 18 kW |
Maximum Amperage | 44 AMPS |
Overcurrent Protection Size | 60 AMPS |
Water Inlet | 3/8" Compression |
Steam Outlet | 1"NPT |
Safety Valve | 3/4"NPT |
Electrical Connecton | Hardwired |
Model | PP18SR-480 |
---|---|
Input Voltage | 480VAC , 3-Phase |
Kilowatt Rating | 18 kW |
Maximum Amperage | 22 AMPS |
Overcurrent Protection Size | 30 AMPS |
Water Inlet | 3/8" Compression |
Steam Outlet | 1" NPT |
Safety Valve | 3/4" NPT |
Electrical Connection | Hardwired |
The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet.
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project's success.
ThermaSol PP24LR
PowerPak Series 24kW Steam Shower Generator
Designed with durability in mind by using a split tank design to enhance performance and lifespan the ThermaSol PP24LR is a must have. It is a 24kW commercial generator for health club steam rooms larger than 1000 cubic feet (CF). The ThermaSol PowerPak generators give you constant steam at a constant rate.
See Shipping Tab
- Delivered fully assembled
- Split tank design
- Can be located up to 50 feet from steam room
- No additional drain line required
- Stainless steel tank
- Corrosion resistance Incoloy heating elements
- All access from and top panel
- 18 month parts and labor warranty
- PowerPak Series Generator
- Temperature Sensor & 50' lead wire
- Polished Chrome Steam head
- Digital Timer & M8 cable
- Warranty
Model | PP24LR-240 |
---|---|
Input Voltage | 208-240VAC , 3-Phase |
Kilowatt Rating | 24 kW |
Maximum Amperage | 58 AMPS |
Overcurrent Protection Size | 70 AMPS |
Water Inlet | 3/8" Compression |
Steam Outlet | 1" NPT |
Safety Valve | 3/4"NPT |
Electrical Connection | Hardwired |
Model | PP24LR-480 |
---|---|
Input Voltage | 480VAC, 3-Phase |
Kilowatt Rating | 24 kW |
Maximum Amperage | 29 AMPS |
Overcurrent Protection Size | 40 AMPS |
Water Inlet | 3/8" Compression |
Steam Outlet | 1" NPT |
Safety Valve | 3/4" NPT |
Electrical Connection | Hardwired |
The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet.
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project's success.
Mr.Steam C1000
CU Series 24kW Steam Shower Generator Package w/CU1000
The Mr.Steam C1000 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 1000 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 24kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, Solenoid Valve, and Auxiliary Manual Reset.
See Shipping Tab
C1000 Club Generator
- Sight glass
- Standard with full 1" drain port
- Stainless steel jacket
- Compact vertical design
- Durable electronic components
- Features National Board registered pressure vessel
- Use high quality fibrous glass pressure vessel insulation for maximum energy performance
- Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
- Steam-rated operating and high limit pressure controls for Steam-On-Demand
- Pressure gauge and sight glass to provide operating information at a glance
- Easy installation and service accessibility
- Meet ASME requirements and UL/CSA nationally recognized testing standards
Digital 1 Control
- Steam room temperature regulating sensor
- Advanced low-mass, quick response thermistor with sensor guard
- Durable and capable of responding to steam room temperature within tight tolerances
- Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4X4 electrical box
- Allows owner/operator to set room temperature accurately and reliably
- Providing efficient, consistent control with full 100˚ F - 120˚ F range
- Integrated in-steam room high temperature control provides an additional level of reliability
Steam Solenoid Valve
- All brass construction with stainless steel trim, sized to match steamhead distribution
- Steam-rated seat for high reliability and quick response steam delivery
Aromasteam Steamhead
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr.Steam's AromaFlo aromatic oil delivery system
Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
Auxiliary Manual Reset
- Independent manual reset
- Backup low water cutoff control
- Steam bath generator 30"L x 20"W x 38"H
- Installation and operation manual
- Limited warranty
Model | C1000 |
---|---|
Minimum Cubic Feet | 751 CF |
Maximum Cubic Feet | 1000 CF |
Kilowatt Rating | 24 kW |
Shipping Weight | 250 lbs |
Water Supply Connection | 1/4" NPT |
Generator Steam Line Connection | 1" NPT |
Steam Head Connection | 3/4" NPT |
Drain Connection | 1" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control "Rough In" Cut Out | 3-1/2" x 3-1/2" |
Control Sensor Cable | 30' 5", 25', 2 Conductor, 24 AWG, Shielded Cable |
Control Sensor "Rough In" Cut Out | 3/8" Diameter |
Generator Control Connection | 6 Position Terminal Block |
Generator Control Cable | 6" Long, 4 Conductors, 16 AWG |
Width | 20" |
Depth | 30" |
Height | 38" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Mr.Steam C1400
CU Series 36kW Steam Shower Generator Package w/CU1400
The Mr.Steam C1400 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 1400 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 36kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, Solenoid Valve, and Auxiliary Manual Reset.
See Shipping Tab
C1400 Club Generator
- Sight glass
- Standard with full 1" drain port
- Stainless steel jacket
- Compact vertical design
- Durable electronic components
- Features National Board registered pressure vessel
- Use high quality fibrous glass pressure vessel insulation for maximum energy performance
- Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
- Steam-rated operating and high limit pressure controls for Steam-On-Demand
- Pressure gauge and sight glass to provide operating information at a glance
- Easy installation and service accessibility
- Meet ASME requirements and UL/CSA nationally recognized testing standards
Digital 1 Control
- Steam room temperature regulating sensor
- Advanced low-mass, quick response thermistor with sensor guard
- Durable and capable of responding to steam room temperature within tight tolerances
- Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4X4 electrical box
- Allows owner/operator to set room temperature accurately and reliably
- Providing efficient, consistent control with full 100˚ F - 120˚ F range
- Integrated in-steam room high temperature control provides an additional level of reliability
Steam Solenoid Valve
- All brass construction with stainless steel trim, sized to match steamhead distribution
- Steam-rated seat for high reliability and quick response steam delivery
Aromasteam Steamhead
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr.Steam's AromaFlo aromatic oil delivery system
Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
Auxiliary Manual Reset
- Independent manual reset
- Backup low water cutoff control
- Steam bath generator 30"L x 20"W x 38"H
- Installation and operation manual
- Limited warranty
Model | C1400 |
---|---|
Minimum Cubic Feet | 1251 CF |
Maximum Cubic Feet | 1400 CF |
Kilowatt Rating | 36 KW |
Shipping Weight | 300 lbs |
Water Supply Connection | 1/4" NPT |
Generator Steam Line Connection | 1" NPT |
Steam Head Connection | 3/4' NPT |
Drain Connection | 1" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control "Rough In" Cut Out | 3-1/2" x 3-1/2" |
Control Sensor Cable | 30' 5", 25', 2 Conductor, 24 AWG, Shielded Cable |
Control Sensor "Rough In" Cut Out | 3/8" Diameter |
Generator Control Connection | 6 Position Terminal Block |
Generator Control Cable | 6" Long, 4 Conductors, 16 AWG |
Width | 20" |
Depth | 30" |
Height | 38" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Mr.Steam C2000
CU Series 48kW Steam Shower Generator Package w/CU2000
The Mr.Steam C2000 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 2000 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 48kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, Solenoid Valve, and Auxiliary Manual Reset.
See Shipping Tab
C2000 Club Generator
- Sight glass
- Standard with full 1" drain port
- Stainless steel jacket
- Compact vertical design
- Durable electronic components
- Features National Board registered pressure vessel
- Use high quality fibrous glass pressure vessel insulation for maximum energy performance
- Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
- Steam-rated operating and high limit pressure controls for Steam-On-Demand
- Pressure gauge and sight glass to provide operating information at a glance
- Easy installation and service accessibility
- Meet ASME requirements and UL/CSA nationally recognized testing standards
Digital 1 Control
- Steam room temperature regulating sensor
- Advanced low-mass, quick response thermistor with sensor guard
- Durable and capable of responding to steam room temperature within tight tolerances
- Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4X4 electrical box
- Allows owner/operator to set room temperature accurately and reliably
- Providing efficient, consistent control with full 100˚ F - 120˚ F range
- Integrated in-steam room high temperature control provides an additional level of reliability
Steam Solenoid Valves (2)
- All brass construction with stainless steel trim, sized to match steamhead distribution
- Steam-rated seat for high reliability and quick response steam delivery
Aromasteam Steamheads (2)
- All brass construction with polished chrome finish
- Full 3/4 inch NPT size for quiet, controlled steam delivery
- Supplied with full coverage polycarbonate cover
- Engineered to operate seamlessly with Mr. Steam's AromaFlo aromatic oil delivery system
Automatic Blowdown System
- System programmed daily discharge of accumulated sediment
- Digital Timer provides 24/7 startup/shutdown and AutoFlush operation
Auxiliary Manual Reset
- Independent manual reset
- Backup low water cutoff control
- Steam bath generator 33"L x 24"W x 44"H
- Installation and operation manual
- Limited warranty
Model | C2000 |
---|---|
Minimum Cubic Feet | 1401 CF |
Maximum Cubic Feet | 2000 CF |
Kilowatt Rating | 48KW |
Shipping Weight | 350 lbs |
Water Supply Connection | 1/2" NPT |
Generator Steam Line Connection | 1" NPT |
Steam Head Connection | 3/4" NPT |
Drain Connection | 1" NPT |
Safety Relief Valve Connection | 3/4" NPT |
Safety Relief Valve PSIG | 15 PSIG |
Control "Rough In" Cut Out | 3-1/2" x 3-1/2" |
Control Sensor Cable | 30' 5", 25', 2 Conductor, 24 AWG, Shielded Cable |
Control Sensor "Rough In" Cut Out | 3/8" Diameter |
Generator Control Connection | 6 Position Terminal Block |
Generator Control Cable | 6" Long, 4 Conductors, 16 AWG |
Width | 24" |
Depth | 33" |
Height | 44" |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.