Steamist 4035
Control Extension Cable, 35'
The 35' extension cable is a 6-wire control cable with “snap-in” connectors. The cable and coupler connects two cables together.
- For Steamist Steam Generator
- Cable is constructed from copper
- Made in the USA
- 35' Steamist 4035 control cable
Model | 4035 |
---|---|
Cable Length | 35 ft |
Material | Copper |
Coupler included | Yes |
Steamist GENPAN
Generator Pan
Designed for use with 5-15kw units in the unlikely event of a slow water leak.
- High-temperature impact-resistant resin
- Solid brass drain connection
- Integral generator support
- Measures 11"W x 24"L x 2"H
- Generator pan
Model | GENPAN |
---|---|
Material | High-temp, impact-resistant resin |
Connections | 3/4" MGHT male threaded NPT and 1/2" NPT female brass connection |
Width | 11" |
Length | 24" |
Height | 2" |
Steamist HC-STD3
Boiler Stand for HC-9 to HC-18 Boilers
Designed for use with HC-9 to HC-18 boilers, this mounting stand raises the steam generator for both safety and comfort during maintenance and repair.
- For use with HC-9 to HC-18 boilers
- Measures 20"L x 10.5"W x 24"H
- Steamist® Stand for use with HC Series Steam Generator
Model: | HC-STD3 |
---|---|
Length: | 20 in. |
Width: | 10.5 in. |
Height: | 24 in. |
Weight: | 23.4 lbs |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Steamist HC-STD7
Boiler Stand for HC-24 to HC-72 Boilers
Designed for use with HC-24 to HC-72 boilers, this mounting stand raises the steam generator for both safety and comfort during maintenance and repair.
- For use with HC-24 to HC-72 boilers
- Measures 14"L x 25-1/2"W x 24"H
- Steamist® Stand for use with HC Series Steam Generator
Model: | HC-STD7 |
---|---|
Length: | 25.5 in. |
Width: | 14 in. |
Height: | 24 in. |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Mr.Steam 104232 AirTempo Flush Mount Kit
AirTempo Flush Mount Kit Round
The AirTempo Control can be installed flush to the wall of your shower or steam room using the AirTempo® Flush Mount Kit, which consists of a sleek bezel into which the control snugly fits. The AirTempo® Flush Mount kit is a great solution if you’re covering a hole left behind by your old steam shower control.
Available in Black or White fascia with Polished Chrome trim or five designer finishes to match any project: Brushed Bronze, Brushed Nickel, Polished Brass, Polished Nickel, Satin Brass, and Oil Rubbed Bronze.
Must order AirTempo Control separately.
- Round mounting kit flush rim to match pre-established control.
- Flush mounting kit equipped with all necessary tools for assembly.
- Available in 7 designer finishes
- Kit not included with AirTempo Control
- Installation Type: Wall-Mounted
- UL Recognized
- Materials: Plastic and Metal
- Kit Dimensions: 4.66” L x 4.66” W x 0.75”H x .12”D
- Product weight: 1 lb.
- Flush Mount Kit
- AirTempo Control
- Decorative Trim
- Cable (3 ft)
- Wireless Receiver
- Batteries (2)
- Mounting hardware (2)
- Steamhead
- Silicone Sealant Tube
- Surface Mount Bayonet
- Installation and operation manual
- 2-Year Warranty (Consumers Use)
Model | 104232RD |
---|---|
Materials | Plastic and Materials |
Installation Type | Wall-Mounted |
Finishes | Polished Chrome, Brushed Bronze, Brushed Nickel, Polished Brass, Polished Nickel, Satin Brass, and Oil Rubbed Bronze |
Length | 4.66" |
Width | 4.66" |
Height | .75 |
Depth | .12 |
Shipping Dimensions | 10"L x 7"W x 4"H |
Product weight | 1 lb |
Shipping weight | 2 lbs. |
Mr.Steam CU99331F
Transformer, Control Voltage, 480V To 120V
The step-down transformer is used to supply the 120V control circuit.
- Transforms 480V operating voltage to 120V control circuit voltage
- 1/4" KVA Transformer
- Recommended where 120 control voltage may be difficult to obtain
Model | CU99331F |
---|---|
Shipping Weight | 14 lbs |
ThermaSol 01-8406-1
PRO Series Steam Generator Drain Pan
Designed for the unlikely event of a slow water leak, the ThermaSol Drain Pan installed beneath the steam generator will aid in the trapping and redirecting of this water to an acceptable and predetermined area.
- Stainless steel construction
- 3/4"NPT female drain connection
- Measures 20" L x 14" W x 3" H
- Drain Pan
Model | 01-8406-1 |
---|---|
Shipping Weight (Lbs.) | 14 lbs |
Drain Connection | 3/4" NPT |
Width In Inches | 14" |
Depth In Inches | 20" |
Height In Inches | 3" |
Steam Sauna Living FIT-206
Fitting Package for MS/SUPER Series Generators
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
- (1) 3/8” Brass Close Nipple
- (1) 3/8” Brass Close Nipple
- (1) 3/8”F NPT x 1/2”M NPT Brass Reducer
- (1) 1/2” Brass Close Nipple
- (3) 1/2”F NPT x 1/2”F NPT Brass Union
- (1) 1/2”C x 1/2”C Brass Water Supply Ball Valve
- (1) 3/4”F NPT x 3/4”F NPT Brass Union
- (3) 1/2”C x 1/2”M NPT Copper Adapter
- (3) 3/4”C x 3/4”M NPT Copper Adapter
- (1) Teflon Tape Roll
Steam Sauna Living FIT-223
Fitting Package for AK/AX Single Generators w/ 3/4" Drain
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
No need for frequent trips searching for those special plumbing fittings…Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation.
Use of these choice fittings will allow you to maximize your in-home, factory and SteamSaunaBath labor warranties! Limited Lifetime Labor Warranty!
NOTE: SteamSaunaBath recommends the use of 1/2" or 3/4" copper pipe for all water, steam, drain and safety valve lines and has provided for such with high-quality copper and brass components. Due to the price structure and nature of these bulk-packaged ingredients, leftover or unused pieces are not returnable.
- (1) 3/8” Brass Close Nipple
- (1) 3/8”F NPT x 1/2”M NPT Brass Reducer
- (1) 3/4” Brass Close Nipple
- (1) 1/2” x 2” Brass Nipple
- (2) 1/2”F NPT x 1/2”F NPT Brass Union
- (1) 1/2”C x 1/2”C Brass Water Supply Ball Valve
- (2) 3/4”F NPT x 3/4”F NPT Brass Union
- (2) 1/2”C x 1/2”M NPT Copper Adapter
- (4) 3/4”C x 3/4”M NPT Copper Adapter
- (1) Teflon Tape Roll
Steam Sauna Living FIT-215
Fitting Package for SM/SMP/TSG Series Generators
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation.
Use of these choice fittings will allow you to maximize your in-home, factory and SteamSaunaBath labor warranties! Limited Lifetime Labor Warranty!
NOTE: SteamSaunaBath recommends the use of 1/2" or 3/4" copper pipe for all water, steam, drain and safety valve lines and has provided for such with high-quality copper and brass components. Due to the price structure and nature of these bulk-packaged ingredients, leftover or unused pieces are not returnable.
- (1) 3/8” Brass Close Nipple
- (1) 1/2” Brass Close Nipple
- (2) 1/2”F NPT x 1/2”F NPT Brass Union
- (2) 1/2”C x 1/2”C Brass Water and Drain Ball Valves
- (2) 3/4”F NPT x 3/4”F NPT Brass Union
- (1) 1/2”C x 1/2”M NPT Copper Adapter
- (4) 3/4”C x 3/4”M NPT Copper Adapter
- (1) 3/8” F NPT x 1/2” NPT Brass Reducer
- (1) Teflon Tape Roll
- (1) 1/2” F NPT x 1/2” Copper Adapter