Mr.Steam Parts
Brands
We carry the largest inventory of Mr. Steam parts for steam generators, accessories, and controls. Call our specialists for assistance and we'll ensure that you get the correct part for your needs.
Mr.Steam 103588DIG
Towel Warmer Digital Timer
Model
103588DIG
SKU
103588DIG
The optional Mr. Steam 103588DIG 24-hour In-wall digital timer comes standard with a white faceplate and allows for on/off and 24-hour towel warmer operation.
MSRP
$150.00
Your Price
$105.00
- 120V operation
- 24-Hour electronic timer
- On/off override operation
- Easy-to-use, pin type timer
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
- Standard White face plate
- Installation and operation manual
- Limited warranty
Model | 103588DIG |
---|---|
Shipping Weight (Lbs.) | 2 lbs |
AC Voltage | 120V AC |
Phase | Single Phase |
Nominal Amperage | Less Than 1 Amp |
Recommended Protective Device | 15 Amp |
Recommended Minimum Copper Wire Supply | 14 AWG |
Control “Rough-In” Cut Out | 2-1/2" x 3-1/2" |
Width In Inches | 2-3/4" |
Depth In Inches | 2" |
Height In Inches | 4-3/8" |
MrSteam 103938
Acrylic Shield for Aroma Designer Finish SteamHead
Model
103938
SKU
103938SQ
Mounting over the new MS 103937 or MS 104040 steam head and designed for use when acrylic or other non-heat resistant construction materials are used for steam room enclosure construction, the Mr.Steam Acrylic Shield will aid in diffusing the steam head heat transfer and redirect the steam-flow. Recommended for steam rooms with minimal floor space, ceiling heights over 8' high and natural stone construction.
MSRP
$80.00
Your Price
$56.00
- Clear Lexan construction, 1/8" thick, transparent look
- Round shield measures 4-3/8" in diameter and is 1/2" deep
- Square shield measures 4" square
- Integral, 1-5/8" diameter mounting hole
- Round shield for use only with MS 103937 steam head
- Square shield for use only with MS 104040 steam head
NOTE: This steam diffuser is a consumable item and will wear. The kilowatt rating of your steam generator, your water quality and other factors will affect the longevity of this component. For this reason, plastic steam diffusers are not warranted or returnable.
MrSteam 103978
Replacement Cable for eTempo Controls
Model
103978-30
SKU
103978-30
This ETempo Control cable is required for the operation of the remote EStart on/off secondary control on MrSteam’s Residential MS model steam bath generators with serial numbers beginning with a 900000.
MSRP
$180.00
Your Price
$126.00
30' cable for use with the eTempo/Start control or HomeWizard. For 60', look to 103978-60.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Please call 800.977.8326 to confirm correct use and current pricing.
All parts pricing is subject to change without notice.
Mr.Steam 104198
Pressure Reducing Valve
Model
104198
SKU
104198
This valve aids in reducing the incoming water pressure as it enters the steambath generator tank. Recommended incoming water pressure is 15 - 20 PSI.
MSRP
$229.50
Your Price
$160.65
- Pressure reducing valve
- Installation manual
- Manufacturer's warranty
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Mr.Steam MSTS
Room Temperature Sensor, with Integral 30' Cable for Tempo controls
Model
MSTS
SKU
MSTS
This Room Sensor is for use on Tempo, eTempo, iTempo, and AirTempo controls on Mr.Steam’s Residential MS model steam bath generators.
MSRP
$225.00
Your Price
$157.50
- Temperature sensing capability, 105-120 degrees Fahrenheit
- Temperature sensing accuracy +/- 2 degree Fahrenheit
- Stainless steel finish
- No-voltage operation
- Low-profile operation
- MSTS surface-mounted sensor probe, 1-1/2” long, 1/4” diameter
- Sensor cable, 30’ long, permanently affixed to sensor and 3-pin plug-in connector
- RTV silicone sealant, .5 ounce tube
- Installation and Operation Manual
- Product Warranty
Model | MSTS |
---|---|
Shipping Weight | 2 lbs |
DC Voltage | 5V DC |
Generator Control Connection | 3 Pin, Plug-In Connector |
Generator Control Cable | 30', 3 Conductor, 24 AWG, Shielded Cable |
Depth | 1-1/2" |
Diameter | 1/4" |
Mr. Steam 103985
Polycarbonate Shield For 103984 Steam Head
Model
103985
SKU
103985
This Polycarbonate Shield is recommended on each steam head emitting steam on Mr.Steam’s Commercial CU model steam bath generators.
MSRP
$75.00
Your Price
$60.00
- Polycarbonate Shield for use with 103984 Steam Head
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Mr.Steam 104072
Steam Vent for CU 99216 Timers
Model
104072
SKU
104072
Required for use with CU 99216DIG Digital Timer and CU 99216B Mechanical Timer.
Your Price
$338.75
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Mr. Steam CU99331C
Transformer, Control Voltage, 208/240V To 120V
Model
CU99331C
The step-down transformer is used to supply the 120V control circuit.
- Transforms 208V or 240V operating voltage to 120V control circuit voltage
- 1/4" KVA Transformer
- Recommended where 120 control voltage may be difficult to obtain
Model | CU99331C |
---|---|
Shipping Weight | 14 lbs |
Mr.Steam CU99331F
Transformer, Control Voltage, 480V To 120V
Model
CU99331F
The step-down transformer is used to supply the 120V control circuit.
- Transforms 480V operating voltage to 120V control circuit voltage
- 1/4" KVA Transformer
- Recommended where 120 control voltage may be difficult to obtain
Model | CU99331F |
---|---|
Shipping Weight | 14 lbs |
Mr. Steam 100378
Probe Isolator
Model
100378
SKU
100378
This Probe Isolator is required for appropriate water fill operation to avoid improper sensing of water on Mr.Steam’s Commercial CU model steam bath generator models CU360 – CU1400.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$120.00
- allows water probes to function more precisely
- eliminates water splash from the boiling water
- compatible with commercial models CU360-CU1400
- Isolator Probe
Model | 100378 |
---|---|
Fits Commercial Models: | CU360-CU1400 |