Steamist 4010
Control Cable, 10'
The 10' Steamist 4010 control cable is required for the operation of steam bath generator control models TC, DSP, TSC and SMC.
HIS PRODUCT IS NO LONGER AVAILABLE. PLEASE SEE OUR SELECTION OF STEAMIST PARTS.
- 10 foot extension cable
- Coupler included
- Made in the USA
- 10' Steamist 4010 control cable
Model | 4010 |
---|---|
Wire Length | 10 ft |
Coupler Included | Yes |
Required for use with | Steamist models TC, DSP, TSC and SMC |
Steamist 4035
Control Extension Cable, 35'
The 35' extension cable is a 6-wire control cable with “snap-in” connectors. The cable and coupler connects two cables together.
- For Steamist Steam Generator
- Cable is constructed from copper
- Made in the USA
- 35' Steamist 4035 control cable
Model | 4035 |
---|---|
Cable Length | 35 ft |
Material | Copper |
Coupler included | Yes |
Steamist 4050
Control Cable, 50'
This 50' control cable is required for the operation of steam bath generator control models TC, DSP, TSC and SMC.
- Cable is constructed from copper
- 50' in length
- UL certified
- Made in the USA
- 6-pin 50' foot control cable only, no coupler.
Model | 4050 |
---|---|
Cable Length | 50 ft |
Material | Copper |
Coupler Included | No |
Required for use with | Steamist models TC, DSP, TSC and SMC. |
Steamist 007-5158
Control Cable/TSG Ganging Cable, 35'
This 35' 6-pin cable is used for the Steamist steam generator controls TC/SMC/TSC and if tandeming TSG generators together.
THIS PRODUCT HAS BEEN DISCONTINUED. PLEASE SEE DELTA PARTS.
Parts are not returnable.
Please call 800.977.8326 to confirm correct use and current pricing.
All parts pricing is subject to change without notice.
Steamist 5370
Control Cable/TSG Ganging Cable, 10', Steamist
This cable is male to male snap-in cable ends. When used as a control cable, one end snaps into the back of the control and the other snaps into the PC Board.
THIS PRODUCT IS NO LONGER AVAILABLE. PLEASE SEE DELTA PARTS
Steamist TSTR
Trim Ring for ChromaSense Light
Designer Finish Trim Ring for ChromaSense Light.
Optional designer finish trim ring for the ChromaSense shower light fixture. The ChromaSense shower light fixture comes standard with Polished Chrome. Select from one of the the following additional 5 finish options: Polished Nickel, Brushed Nickel, Polished Gold, Brushed Bronze, or Oil Rubbed Bronze.
Steamist DC-ABD
Digital Automatic Blowdown Valve
Designed for use with the DCCP Digital control and optional on all HC boilers, this electrically operated drain valve provides automatic routine boiler draining.
This product is not sold separately. It must be purchased on the same order as a compatible boiler.
- Motorized drain valve, 1” NTP
- 24-hour programmable time clock
- Installation and operation manual
- Limited warranty
Model: | DC-ABD |
---|---|
Volts: | 208 V |
Operating Pressure: | 15 PSI |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Steamist HC-BDT
ASME Blow-Down Tank
The optional Steamist ASME Blow-down Tank meets ASME code and is designed to safely augment the blowdown process.
See Shipping Tab
- Hot water drainage into tank before the usage of drainage system.
- The tank permits HC Blowdown system to stay complaint with codes prohibiting discharge of water exceeding 140°F.
- Boiler HP Max: 15
- Maximum Blowdown Separator Pressure: 65 psi
- HC Series Blowdown Tank
Model: | HC - BDT |
---|---|
Width: | 12 in. |
Height: | 27.75 in. |
Boiler HP Max: | 15 |
Max Blowdown Separator Pressure: | 65 PSI |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Steamist 002-1075
Line Cord w/plug, HPJ-2S
This 9' Black Line Cord 12/3 105C w/Plug is for use with Steamist's HPJ-2S Jewelry Cleaner.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Steamist 002-1084
Cable, CAT5, CMR, Solid, Foot
This CAT5 CMR Solid Cable, sold per foot, is for use with Steamist Equipment
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.