Steam & Sauna Buyer's Club

 

Steam Room Accessories

Amerec I24/1
24-Hour Drain System Timer, AI Series
Price
MSRP
$185.00
Your Price
$129.50
Amerec I24-7
7-Day Boiler Timer, AI Series, Amerec
Price
MSRP
$185.00
Your Price
$129.50
Amerec I60
60-Minute Timer Control, AI Series
Price
MSRP
$265.00
Your Price
$185.50
Amerec 9208-101
External On/Off Switch
Price
MSRP
$310.00
Your Price
$248.00
Amerec D24/7
24-Hour, 7-Day Digital Boiler Timer w/ Battery Back Up, AI Series
Price
MSRP
$335.00
Your Price
$234.50
Amerec IDS
Refresh Steam System, AI Series, Amerec
Price
MSRP
$360.00
Your Price
$252.00
Amerec ADI
Automatic Drain System, AI Series
Price
MSRP
$1,220.00
Your Price
$854.00
Amerec ADI-D
Automatic Drain System w/ Digital Run Clock, AI Series
Price
MSRP
$1,250.00
Your Price
$875.00

Amerec ADI

Automatic Drain System, AI Series

Model
ADI
SKU
9210-118
UPC
646028003656

Optional on all AI boilers, this electrically operated drain valve allows for automatic routine boiler draining.

MSRP
$1,220.00
Your Price
$854.00
  • Automatically drains water
  • Effective preventative maintenance program
  • Motorized drain valve, 120V AC, 3/4” NTP
  • Analog time clock I24/1
  • Installation and operation manual
Swipe horizontally to reveal full table content.
Model ADI
Shipping Weight 7 lbs
AC Voltage 120V AC
DC Voltage 120V AC
Phase Single Phase
Nominal Amperage Less Than 1 Amp

Amerec D24/7

24-Hour, 7-Day Digital Boiler Timer w/ Battery Back Up, AI Series

Model
D24-7
SKU
9226-19

As an option for operating any AI boiler, the Amerec D24/7 will start and stop at preset times (2-hour increments) throughout the week.

MSRP
$335.00
Your Price
$234.50
  • 7-day programmable on/off time settings (2-hour increments)
  • 120V AC operation
  • Boiler mounting
  • Removable protective shield
  • Boiler mounting
  • Installation and operation manual
Swipe horizontally to reveal full table content.
Model D24/7
Product Weight 1 lb
AC Voltage 120V AC
DC Voltage 120V AC
Width 3"
Depth 1.5"
Height 3"

Amerec I24/1

24-Hour Drain System Timer, AI Series

Model
I24-1
SKU
9226-16
UPC
646028001270

As an option for operating the electronic autodrain blowdown valve, the I24/1 time clock allows for routine daily performance of the Amerec ADI Automatic Drain System.

MSRP
$185.00
Your Price
$129.50
  • 24-hour programmable on/off time settings (30-minute increments)
  • 120V AC operation
  • Boiler mounting
  • Removable protective shield
  • Time clock, 120V AC
  • Installation and operation manual
Swipe horizontally to reveal full table content.
Model I24/1
Shipping Weight 4 lbs
AC Voltage 120V AC
DC Voltage 120V AC
Phase Single Phase
Nominal Amperage Less Than 1 Amp
Width 2-3/4"
Depth 2"
Height 2-3/4"

Amerec I24-7

7-Day Boiler Timer, AI Series, Amerec

Model
I24-7
SKU
9226-15

As an option for operating any AI boiler, the Amerec I24/7 will start and stop at preset times (2-hour increments) throughout the week.

MSRP
$185.00
Your Price
$129.50
  • 7-day programmable on/off time settings (2-hour increments)
  • 120V AC operation
  • Boiler mounting
  • Removable protective shield
  • Boiler mounting
  • Installation and operation manual
Swipe horizontally to reveal full table content.
Model I24/7
Shipping Weight 4 lbs
AC Voltage 120V AC
DC Voltage 120V AC
Phase Single Phase
Nominal Amperage Less Than 1 Amp
Width 2-3/4"
Depth 2"
Height 2-3/4"

Amerec I60

60-Minute Timer Control, AI Series

Model
I60
SKU
9226-10

Optional, and for use with all Amerec AI boilers the user activated, I60 60-Minute Electronic Timer mounts near the steam room for steam on/off 60-minute timer operation.

MSRP
$265.00
Your Price
$185.50
  • 60-minute countdown timer switch
  • Mode indicator light
  • 5V DC operation
  • 3-lead, 25’ control cable
  • I60 timer, (4½”x2½”)
  • Fasteners
  • Decorative wall plate
  • Installation and operation manual
Swipe horizontally to reveal full table content.
Model I60
Shipping Weight 2 lbs
DC Voltage 5V DC
Control "Rough In" Cut Out 2-1/8" x 3-3/4"
Control Sensor Cable 25', 3 Conductor, 22 AWG, Shielded Cable
Generator Control Connection 3 Position Terminal Block
Generator Control Cable 25', 3 Conductor, 22 AWG, Shielded Cable
Width 2-3/4"
Depth 1"
Height 4-1/2"

Steamist 68020

Auxiliary Manual Reset Low-Water Control, HC Series

Model
68020

Optional on HC series steam bath generators, this manual reset low water cutoff offers an independent, secondary control device which is required in many states (including GA, IA, MA, NC, TX, & WA).

  • All HC series steam bath generators
  • Low Water Cutoff
  • Manual Reset
  • Independent, secondary control device
  • Required code in local jurisdictions (including GA, IA, MA, NC, TX & WA)
  • Factory installed only

To ensure the accuracy of your order, please do contact an Accurate Industries representative at 800-977-8326. We enjoy sharing our knowledge and wish to ensure your success.

ThermaSol DS-SEN-PC

Sentinel Room In-Use Indicator

Model
DS-SEN-PC
SKU
DS-SEN-PC

ThermaSol Day Spa Room Sentinel DS-SEN-PC room monitor, designed for use with ThermaSol's Commercial Day Spa Series steam shower systems, makes room management a breeze. When placed at the front desk or near the room attendant, room status can be monitored at a glance.

MSRP
$450.00
Your Price
$315.00
  • Room Management simplified
  • Can be installed up to 100 feet from steam distribution system
  • Green light for available , Red light for in use
  • Warranty
  • In-use room indicator
Swipe horizontally to reveal full table content.
Model DS-SEN-PC
Location Within 100 feet of steam distribution system

Steam Sauna Living SSL-T204

Steam Room / Shower Squeegee, Dual Bladed

Model
SSL-T204
SKU
0003CLASSIC

This dual-bladed squeegee was chosen Consumer Product of the Year by The Industrial Designers Society of America and selected for inclusion in the Smithsonian's permanent design collection! Attractive enough so it needn't be hidden after use, this squeegee's 10" soft, flexible, dual wiping blades conform to most all contoured surfaces guaranteeing crystal clear results!

MSRP
$37.31
Your Price
$29.85
  • Chosen Consumer Product of the Year by The Industrial Designers Society of America
  • Selected for inclusion in the Smithsonian's permanent design collection
  • Measures 10" wide
  • Soft, flexible, dual wiping blades
  • Ergonomically designed
  • Conforms to most all contoured surfaces
  • Wall mounted holder
Swipe horizontally to reveal full table content.
Model SSL-T204
Shipping Weight 6 lbs
Blade Length 10"

Bathology Clear 420

Steam Room / Shower Stainless Steel Squeegee with Mount

Model
Clear 420

Durable elegance in bathing environment care by Bathology!

The Clear 420 employs a sleek, simple, and stout stainless steel frame and contoured resilient blade for balanced comfort with optimum water disbursement.

MSRP
$120.00
Your Price
$108.00
  • All-stainless construction
  • Stainless steel hardware
  • Contoured blade technology
  • Complementary wall-mount
  • Durable and elegant design
  • Balanced in-hand comfort
  • Crystal clear glass
  • Simplified installation
  • Squeegee, Stainless Steel
  • Wall-mount, Stainless Steel
  • Wall-mount fastener, stainless steel
  • Mounting screw, 1-1/2", stainless steel
  • Anchor, plastic
  • RTV silicone sealant, .5 ounce tube
  • Hexagonal allen wrench
  • Installation and operation manual
Swipe horizontally to reveal full table content.
Model Clear 420
Shipping Weight 2 lbs
Width 7-13/16"
Depth 1-9/16"
Height 7-1/2"

Bathology RB 310

Steam Room Temperature Sensor Guard, 2" x 5"

Model
RB 310

A sensor tampering cure and more by Bathology!

Expect consistent and reproducible steam bathing temperatures when installing the RB 310 Steam Room Temperature Sensor Guard.

MSRP
$98.00
Your Price
$88.20
  • Elegant 4B brushed stainless finish
  • Sensor isolation mount
  • Rugged 18 gauge stainless steel construction
  • Small-scale, low profile design
  • Stainless steel fasteners
  • Progressive beveling and integral air slots
  • Universal sensor installation
  • Consistent and reproducible bathing experiences
  • Enhanced sensor accuracy
  • Well-balanced bathing environment
  • Reduces sensor tampering
  • Near-permanent installation
  • Sensor guard, stainless steel, 5-1/8”W x 2-3/8”H x 1-1/4”D
  • (3) Solid wall anchors with anti-rotation fins, AF5 Alligator, flangeless, full length extrusion
  • (3) Stainless steel sheet metal screws, Phillips 1" #6 Pan, Type A point, thread size 18
  • Sensor screw mount
  • Sensor tie
  • RTV silicone sealant, .5 oz tube
  • Mounting template
  • Installation and operation manual
Swipe horizontally to reveal full table content.
Model RB 310
Shipping Weight 2 lbs
Material 18 gauge stainless steel, brushed 4B finish
Width 5-1/8"
Height 2-3/8"
Depth 1-1/4"