Steamist 007-1276
Terminal Block 3 Pole, (1 Phase)
Model
007-1276
This 3-Pole 1Phase Terminal Block is for use with Steamist equipment.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Steamist 007-1277
Fuse, 35A,250V,Class H OR 5K
Model
007-1277
This 35A 250V Class H OR 5K Fuse is for use with Steamist equipment.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Steamist 007-1280
Fuse, 1 Amp, HC-9 to HC-72
Model
007-1280
SKU
007-1280
This 1amp, 250V control fuse is used for all HC model steam bath generators HC-9 through HC-72 and there of two of these used on every model.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$55.00
- Two needed on every model
- compatible with HC model steam bath generators HC-9 through HC-72
- Fuse
Model | 007-1280 |
---|---|
Amps | 1amp |
Volts | 250V |
Steamist 007-1282
Transformer, Multitap, 480V
Model
007-1282
This 480V Multitap Transformer is for use with Steamist equipment.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
THIS PRODUCT IS NO LONGER AVAILABLE. PLEASE SEE OUR SELECTION OF STEAMIST PARTS.
Steamist 007-1290W7
Water Gauge Fixture Assembly for HC Models
Model
007-1290W7
SKU
007-1290W7
This Water Gauge Fixture Assembly is required on Steamist’s Commercial HC model steam bath generators.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$147.00
- 7" Gauge glass
- Protective rods
- Valve set
- Brass nuts
- Friction washers
- Rubber washers
Steamist 007-1301
3-Pole, 40/50 AMP
Model
007-1301
This electrically controlled Contactor is 3-Pole 40/50Amp 208V/240V.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
- Compatible with:
- HC-9 through HC-72 commercial models with either CP1 or DCCP control package in Three Phase only.
- SM-11, SM-12 and SM-15 residential models, in Three phase, prior to Serial # 1030000 (1/19/2015)
- Contactor
Model | 007-1301 |
---|---|
Amp | 40/50 Amp |
Phase | 3 |
Volts | 208/240V |
Steamist 007-1307
Contactor 2-Pole 40/50A 208V1PH
Model
007-1307
SKU
007-1307
This electronically controlled switch is 2-pole 40/50Amp used with 208V/240V 1PH electrical supply.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$65.00
Steamist 007-1310
Contactor, 4-Pole, 40/50 AMP
Model
007-1310
SKU
007-1310
This electronically controlled contactor switch is 4-Pole 40/50Amp 208V/240V 1PH.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$155.00
It is used with the following steam bath generators:
- HC-12 through HC-48 commercial models with either control package CP1 or DCCP
- SM-12 and SM-15 residential models prior to serial number 1030000 (1/19/2015)
- Contactor
Model | 007-1310 |
---|---|
Amp | 40/50 Amp |
Posts | 4 |
Volts | 208/240V |
Steamist 007-1311
Contactor, 25AMP 1-Pole, 3-Pole
Model
007-1311
SKU
007-1311
This contactor is used on Steamist steam shower generators SM-1PB/TC through SM-6PB/TC which were produced in the late 1980's.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$100.00
Steamist 007-1400-RETRO
DCCP Retro Fit Kit
Model
007-1400-RETRO
SKU
007-1400-RETROL
For replacement of 1st generation DCCP components on HC boilers up to Serial# E-39999.
NOTE: To preserve the originality, operation and safety of replacement parts, this product is not returnable.
Your Price
$775.00