Steamist TA-100
Programmable Steamroom Temperature Alert
Steamist's TA-100 Programmable Steamroom Temperature Alert helps ensure the safety and comfort of member bathers. Designed for use with Steamist HC series steam bath generators in health clubs, hotels, and spas.
- Digital Temperature Display
- Built-in audible alarm
- Secondary auxiliary alarm available
- Selectable Fahrenheit/Celsius
- Adjustable alarm from 100F to 194F
- Tamper-proof lock feature
- 12 volt UL Class II power supply
- 5A output relay to interrupt heater when the alarm sounds
- Temperature must cool below the maximum allowed temperature before the reset button will disarm the alarm
- Test button
- HC model generators built with DCCP control since 2013 are prewired to accept the TA-100 and provides 12 volt power required
- Installs outside the steam room
- TA-100 Temperature Alert
- Temperature Sensor
- Auxiliary Alarm
- Installation and operation manual
Model | TA-100 |
---|---|
AC Voltage | 12V AC |
Wire Size | Heater Interrupt Relay 4-conductor 22AWG |
Temperature Sensor 2-conductor 22AWG | |
Auxiliary Alarm 2-conductor 22AWG | |
Dimensions | 6-1/2"W x 7"H x 1-3/4"D |
The driver is responsible for curbside delivery “only” and will lower the items to ground level.
Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.
Our goal is to ensure your project success.
Mr. Steam CU Alarm
Temperature Alarm, CU Series, Mr. Steam
This audible alarm sounds in the event the steam room maximum set temperature is exceeded or the CU SteamStop switch is pressed.
- Mounts in standard 4x4 electrical box
- Eight alarm tones
- Two alarm volumes
- Outside the steam shower installation
- Installation and operation manual
- Manufacturer's Warranty
Model | CU Alarm |
---|---|
Shipping Weight | 5 lbs |
AC Voltage | 115V AC |
Mr.Steam CU SteamStop
Stop Switch, CU Series
This CU SteamStop emergency stop switch electronically shuts down the steam generator and initiates the Digital 1 internal alarm and the CU Alarm, if installed.
- Electronically shuts down generator
- Multiple switches can be used with one generator
- Works with Digital 1 or F1 operating control
- Initiates Digital 1 internal alarm
- Initiates CU Alarm, if installed
- Inside/Outside steam room installation
- Steam Stop button
- 30' Low voltage wire
- Installation and operation manual
- Limited warranty
Model | CU SteamStop |
---|---|
Shipping Weight | 5 lbs |
Accurate Industries SSL-T509
Non-Slip Adhesive Strips
Designed to gain traction where there is a potential for slipping, non-slip water-proof strips are for use on steam room flooring or bottom benching. Available in 1", 2" and 3" widths, these grit impregnated non-slip clear strips utilize superior adhesive backing and are packaged in 60' rolls allowing for custom-cut use.
- For use on steam room flooring or bottom benching
- Designed to gain traction where there is potential for slipping
- Available in 1", 2", and 3" widths
- Superior adhesive backing
- Packaged in 60' rolls allowing for custom-cut use
Model | SSL-T509 |
---|---|
Width In Inches | 1", 2", and 3" |
Mr.Steam CU-HTC High Limit Device
LIMIT, HIGH TEMP, HC
High temperature limit device for use with any Mr.Steam CT or CU steam generator system to provide temperature shutoff and alarm functions.
Delta Temperature Alert
Commercial Steam Temperature Alert
The commercial steam temperature alert is a must-have for safety. The lock feature prevents users from turning off the system or changing the temperature setpoint. The interrupt relay disables the heater when the audible alarm sounds and the test button is used to check that the heater is disabled when the alert sounds. The alert cannot be reset until the room cools below the programmed temperature.
- Lock feature prevents users from turning off the system or changing the temperature setpoint
- The alert cannot be reset until the room cools below the programmed temperature
- Interrupt relay disables heater when the audible alarm sounds
- Test button is used to check that the heater is disabled when alert sounds
- US Customer Support and Service
- Digital Display with Audible Alert
- Secondary Remote Audible Alert
- Tamper-Proof Lock
- Heater Interrupt Relay and Test Button
Model | Temperature Alert |
---|---|
Width | 6.5" |
Depth | 1.75" |
Height | 7" |
Prop 65 Warning | DEHP Phthalate |
Delta Blowdown Tank
Commercial Steam Blowdown Tank
This commercial steam blowdown tank permits draining of hot boiler water into the tank before it is dumped into drainage system. Allowing you to comply with codes prohibiting discharge of water exceeding 140 degrees Fahrenheit. For use with commercial steam generators (5COM).
- Permits draining of hot boiler water into the tank before it is dumped into drainage system
- Allows the blowdown system to comply with codes prohibiting discharge of water exceeding 140°F
- US Customer Support and Service
- Blowdown Tank
- Temperature Gauge
- Water Gauge
- Pressure Gauge
Model | 5COM-GA-007 |
---|---|
Overall Height | 33" |
Prop 65 Warning | Lead |
Delta Auxillary Manual Reset
Commercial Steam Auxillary Manual Reset
Many states and local jurisdictions, as a standard, require an independent, manual reset, second low water cut off control. This is a factory-installed option and cannot be sold without a 5COM Series Steam Generator.
Steam Generator Sold Separately
- Many states and local jurisdictions, as a standard, require an independent, manual reset, second low water cut off control
- Check with your jurisdiction if this needs to be ordered together with the 5COM Series Commercial Steam Generators
- This is a factory-installed option and cannot be sold without a 5COM series Steam Generator
- US Customer Support and Service
- Auxillary Manual Reset
Model | 5COM-GA-020 |
---|---|
Overall Height | 14" |