Steam & Sauna Buyer's Club

 

Health Club Steam Shower Generators

Commercial Health Club Steam Generators

Steam Generators are the heart of every health club steam room. SteamSaunaBath carries the best commercial steam shower generators from Mr. Steam, Amerec, Steamist, ThermaSol, and Lattner.

Steamist HC-9

HC Series Commercial Steam Room Generator, 9kW

Model
HC-9

The Steamist HC-9 is a 9kW electric steam room boiler from the HC Series and is engineered for around-the-clock operation of the most demanding commercial health club steam rooms.

See Shipping Tab

HC Boiler

  • Industrial grade heating element
  • Pressurized vessel for instant steam operation
  • Durable electronic components
  • Built to ASME code
  • Available automatic system for daily blowdown
  • Operates with electronic steam room temperature control
  • Full 1” drain port
  • Operating, electronic high limit and ASME safety valve pressure systems
  • UL listed and built to ASME B & PV code
  • Sight glass

DCCP Digital Commercial Control Package

  • Digitial touchpad
  • Programmable time user control
  • "Idle" energy conservation mode
  • 7-day, 24-hour programmable timer
  • Up to 6 daily programmable settings changes
  • HC-PCMR Auxiliary Manual Reset Pressure Cutoff
  • DCC Digital Command Center control with 50' cable
  • User Bypass Control with 50' cable
  • Room Sensor with 50' cable
  • Control Module
  • Steam Solenoid, factory installed
  • Steamhead with Cool Sense cover
  • Installation and operation manual
  • Limited warranty
Swipe horizontally to reveal full table content.
Model HC-9
Minimum Adjusted Cubic Feet 201
Maximum Adjusted Cubic Feet 400
Kilowatt Rating 9 KW
Generator Steam Line Connection 1/2" NPT
Steam Head Connection 1/2" NPT
Drain Connection 1/2" NPT
Safety Relief Valve Connection 3/4" NPT
Safety Relief Valve 15 PSIG
Control Sensor Cable 2 Conductor, 22 AWG, Shielded Cable
Control Sensor "Rough In" Cut Out 5/8" Diameter
Generator Control Connection 3 Wire Nuts
Generator Control Cable 3 Conductor, 22 AWG, Shielded Cable
Width 22-1/2"
Depth 19"
Height 28"

 

The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet. 

The driver is responsible for curbside delivery “only” and will lower the items to ground level. 

Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses. 

Our goal is to ensure your project's success.

 

Required for Operation
Second Room Control Package
Model
SRP

Designed for use as a second room control with the HC Series of Steam Boilers, the Steamist SRP control package comes complete with an additional user bypass control and cable, a room sensor and cable, a steam solenoid pre-assembled to the generator, and a steam head.

**NOTE:  Only sold with boiler.

Lattner 9AF

SteamEase Series Electric Steam Bath Boiler, 9KW

Model
9AF
SKU
9-AF-S

Lattner 15AF, Electric Steam Bath Boiler, is engineered to power rooms up to 360 cubic feet (CF). Includes digital operating control package for single or dual room application (select below). The Lattner Steamease AF series includes 1 steam head per room.

See Shipping Tab

Your Price
$6,935.00
  • Industrial grade incoloy heating elements
  • Fully insulated shell with metal jacket
  • Automatic operating controls
  • ASME low-pressure operation compliance
  • National Board registered vessel
  • Room hi-limit pressure control
  • Operates with digital room temperature controller
  • Operating, electronic hi-limit and ASME safety valve pressure control system
  • Safety valve
  • Blowdown valves for boiler and level control
  • On/off switch and terminals for connection of feed water equipment
  • UL listed and built to ASME code
  • 9AF Steam Boiler
  • Digital room temperature controller, single or dual
  • One (1) waterproof sensor with shield per room
  • One (1) factory-wired steam solenoid valve assembly per room
  • One (1) steam head per room
Swipe horizontally to reveal full table content.
Model 9AF
Minimum Adjusted Cubic Feet 40
Maximum Adjusted Cubic Feet 360
Kilowatt Rating 9 KW
Shipping Weight 400 lbs
AC Voltage 208V AC
Phase 3 Phase
Nominal Amperage 25 Amps
Recommended Protective Device 40 Amp
Water Supply Connection 3/4" NPT
Generator Steam Line Connection 3/4" NPT
Length 43"
Width 27"
Height 29"

 

The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet. 

The driver is responsible for curbside delivery “only” and will lower the items to ground level or offload at your dock.

Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses. 

Our goal is to ensure your project's success.

 

Lattner 24AF

SteamEase Series Electric Steam Bath Boiler, 24KW

Model
24AF
SKU
24-BF-S

Lattner 24AF, Electric Steam Bath Boiler, is engineered to power rooms up to 960 cubic feet (CF). Includes digital operating control package for single or dual room application (select below). The Lattner Steamease AF series includes 1 steam head per room.

See Shipping Tab

Your Price
$8,065.00
  • Industrial grade incoloy heating elements
  • Fully insulated shell with metal jacket
  • Automatic operating controls
  • ASME low-pressure operation compliance
  • National Board registered vessel
  • Room hi-limit pressure control
  • Operates with digital room temperature controller
  • Operating, electronic hi-limit and ASME safety valve pressure control system
  • Safety valve
  • Blowdown valves for boiler and level control
  • On/off switch and terminals for connection of feed water equipment
  • UL listed and built to ASME code
  • 24AF, 24BF, 24CF, or 24F Steam Boiler
  • Digital room temperature controller, single or dual
  • One (1) waterproof sensor with shield per room
  • One (1) factory-wired steam solenoid valve assembly per room
  • One (1) steam head per room
Swipe horizontally to reveal full table content.
Model 24AF
Minimum Adjusted Cubic Feet 720
Maximum Adjusted Cubic Feet 960
Kilowatt Rating 24 KW
Shipping Weight 445 lbs
AC Voltage 208V AC
Phase 3 Phase
Nominal Amperage 66.7 Amps
Water Supply Connection 3/4" NPT
Generator Steam Line Connection 1" NPT
Length 38"
Width 27"
Height 29"

 

The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet. 

The driver is responsible for curbside delivery “only” and will lower the items to ground level. 

Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses. 

Our goal is to ensure your project's success.

 

Lattner 36AF

SteamEase Series Electric Steam Bath Boiler, 36KW

Model
36AF
SKU
36-AF-S

Lattner 36AF, Electric Steam Bath Boiler, is engineered to power rooms up to 600 cubic feet (CF). Includes digital operating control package for single or dual room application (select below). The Lattner Steamease AF series includes 1 steam head per room. 

See Shipping Tab

Your Price
$9,070.00
  • Industrial grade incoloy heating elements
  • Fully insulated shell with metal jacket
  • Automatic operating controls
  • ASME low-pressure operation compliance
  • National Board registered vessel
  • Room hi-limit pressure control
  • Operates with digital room temperature controller
  • Operating, electronic hi-limit and ASME safety valve pressure control system
  • Safety valve
  • Blowdown valves for boiler and level control
  • On/off switch and terminals for connection of feed water equipment
  • UL listed and built to ASME code
  • 36AF, 36BF, 36CF, or 36F Steam Boiler
  • Digital room temperature controller, single or dual
  • One (1) waterproof sensor with shield per room
  • One (1) factory-wired steam solenoid valve assembly per room
  • One (1) steam head per room
Swipe horizontally to reveal full table content.
Model 36AF
Minimum Adjusted Cubic Feet 1200
Maximum Adjusted Cubic Feet 1440
Kilowatt Rating 36 KW
Shipping Weight 500 lbs
AC Voltage 208V AC
Phase 3 Phase
Nominal Amperage 100 Amps
Water Supply Connection 3/4" NPT
Generator Steam Line Connection 1-1/4" NPT
Length 43"
Width 29"
Height 29"

 

The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet. 

The driver is responsible for curbside delivery “only” and will lower the items to ground level. 

Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses. 

Our goal is to ensure your project's success.

 

Lattner 48AF

SteamEase Series Electric Steam Bath Boiler, 48KW

Model
48AF
SKU
48-BF-S

Lattner 48AF, Electric Steam Bath Boiler, is engineered to power rooms up to 1,920 cubic feet (CF). Includes digital operating control package for single or dual room application (select below). The Lattner Steamease AF series includes 1 steam head per room.

See Shipping Tab

Your Price
$9,850.00
  • Industrial grade incoloy heating elements
  • Fully insulated shell with metal jacket
  • Automatic operating controls
  • ASME low-pressure operation compliance
  • National Board registered vessel
  • Room hi-limit pressure control
  • Operates with digital room temperature controller
  • Operating, electronic hi-limit and ASME safety valve pressure control system
  • Safety valve
  • Blowdown valves for boiler and level control
  • On/off switch and terminals for connection of feed water equipment
  • UL listed and built to ASME code
  • 48AF Steam Boiler
  • Digital room temperature controller, single or dual
  • One (1) waterproof sensor with shield per room
  • One (1) factory-wired steam solenoid valve assembly per room
  • One (1) steam head per room
Swipe horizontally to reveal full table content.
Model 48AF
Minimum Adjusted Cubic Feet 1440
Maximum Adjusted Cubic Feet 1920
Kilowatt Rating 48 KW
Shipping Weight 650 lbs
AC Voltage 208V AC
Phase 3 Phase
Nominal Amperage 133.4 Amps
Water Supply Connection 3/4" NPT
Generator Steam Line Connection 1-1/4" NPT
Length 43"
Width 29"
Height 32"

 

The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet. 

The driver is responsible for curbside delivery “only” and will lower the items to ground level. 

Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses. 

Our goal is to ensure your project's success.

 

Lattner 15AF

SteamEase Series Electric Steam Bath Boiler, 15KW, 208V, 3PH

Model
15AF
SKU
15-AF-S

Lattner 15AF, Electric Steam Bath Boiler, is engineered to power rooms up to 600 cubic feet (CF). Includes digital operating control package for single or dual room application (select below). The Lattner Steamease AF series includes 1 steam head per room.

See Shipping  Tab

Your Price
$7,010.00
  • Industrial grade incoloy heating elements
  • Fully insulated shell with metal jacket
  • Automatic operating controls
  • ASME low-pressure operation compliance
  • National Board registered vessel
  • Room hi-limit pressure control
  • Operates with digital room temperature controller
  • Operating, electronic hi-limit and ASME safety valve pressure control system
  • Safety valve
  • Blowdown valves for boiler and level control
  • On/off switch and terminals for connection of feed water equipment
  • UL listed and built to ASME code
  • 15AF, 15BF, 15CF, or 15F Steam Boiler
  • Digital room temperature controller, single or dual
  • One (1) waterproof sensor with shield per room
  • One (1) factory-wired steam solenoid valve assembly per room
  • One (1) steam head per room
Swipe horizontally to reveal full table content.
Model 15AF
Minimum Adjusted Cubic Feet 360
Maximum Adjusted Cubic Feet 600
Kilowatt Rating 15 KW
Shipping Weight 400 lbs
AC Voltage 208V AC
Phase 3 Phase
Nominal Amperage 41.7 Amps
Recommended Protective Device 50 Amp
Water Supply Connection 3/4" NPT
Generator Steam Line Connection 3/4" NPT
Length 43"
Width 27"
Height 29"

 

The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet. 

The driver is responsible for curbside delivery “only” and will lower the items to ground level.

Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses.

Our goal is to ensure your project's success

.

 

Lattner 18AF

SteamEase Series Electric Steam Bath Boiler, 18KW, 208V, 3PH

Model
18AF
SKU
18-BF-S

Lattner 18AF, Electric Steam Bath Boiler, is engineered to power rooms up to 720 cubic feet (CF). Includes digital operating control package for single or dual room application (select below). The Lattner Steamease AF series includes 1 steam head per room.

See Shipping Tab

Your Price
$7,110.00
  • Industrial grade incoloy heating elements
  • Fully insulated shell with metal jacket
  • Automatic operating controls
  • ASME low-pressure operation compliance
  • National Board registered vessel
  • Room hi-limit pressure control
  • Operates with digital room temperature controller
  • Operating, electronic hi-limit and ASME safety valve pressure control system
  • Safety valve
  • Blowdown valves for boiler and level control
  • On/off switch and terminals for connection of feed water equipment
  • UL listed and built to ASME code
  • 18AF, 18BF, 18CF, or 18F Steam Boiler
  • Digital room temperature controller, single or dual
  • One (1) waterproof sensor with shield per room
  • One (1) factory-wired steam solenoid valve assembly per room
  • One (1) steam head per room
Swipe horizontally to reveal full table content.
Model 18AF
Minimum Adjusted Cubic Feet 600
Maximum Adjusted Cubic Feet 720
Kilowatt Rating 18 KW
Shipping Weight 400 lbs
AC Voltage 208V AC
Phase 3 Phase
Nominal Amperage 50 Amps
Recommended Protective Device 60 Amp
Water Supply Connection 3/4" NPT
Generator Steam Line Connection 3/4" NPT
Length 43"
Width 27"
Height 29"

 

The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet. 

The driver is responsible for curbside delivery “only” and will lower the items to ground level. 

Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses. 

Our goal is to ensure your project's success

.

 

Thermasol PP18SR

PowerPak Series 18kW Steam Shower Generator

Model
PP18SR

The ThermaSol PowerPak PP18SR is an 18kW small-room commercial steam shower generator designed for health club steam rooms up to 1000 cubic feet (CF). Thermasol has designed this with durability in mind by using a split tank design it enhances performance and lifespan. 

See Shipping Tab

MSRP
$12,250.00
Your Price
$8,575.00
  • Delivered fully assembled
  • Split tank design
  • Can be located up to 50 feet from steam room
  • No additional drain line required
  • Stainless steel tank
  • Corrosion resistance Incoloy heating elements
  • All access from and top panel
  • 18 month parts and labor warranty
  • PowerPak Series Generator
  • Temperature Sensor & 50' lead wire
  • Polished Chrome Steam head
  • Digital Timer & M8 cable
  • Warranty
Swipe horizontally to reveal full table content.
Model PP18SR-240
Input Voltage 208-240VAC, 3-Phase
Kilowatt Rating 18 kW
Maximum Amperage 44 AMPS
Overcurrent Protection Size 60 AMPS
Water Inlet 3/8" Compression
Steam Outlet 1"NPT
Safety Valve 3/4"NPT
Electrical Connecton Hardwired
Swipe horizontally to reveal full table content.
Model PP18SR-480
Input Voltage 480VAC , 3-Phase
Kilowatt Rating 18 kW
Maximum Amperage 22 AMPS
Overcurrent Protection Size 30 AMPS
Water Inlet 3/8" Compression
Steam Outlet 1" NPT
Safety Valve 3/4" NPT
Electrical Connection Hardwired

The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet. 

The driver is responsible for curbside delivery “only” and will lower the items to ground level. 

Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses. 

Our goal is to ensure your project's success.

ThermaSol PP24LR

PowerPak Series 24kW Steam Shower Generator

Model
PP24LR

Designed with durability in mind by using a split tank design to enhance performance and lifespan the ThermaSol PP24LR is a must have. It is a 24kW commercial generator for health club steam rooms larger than 1000 cubic feet (CF). The ThermaSol PowerPak generators give you constant steam at a constant rate.  

See Shipping Tab

MSRP
$13,250.00
Your Price
$9,275.00
  • Delivered fully assembled
  • Split tank design
  • Can be located up to 50 feet from steam room
  • No additional drain line required
  • Stainless steel tank
  • Corrosion resistance Incoloy heating elements
  • All access from and top panel
  • 18 month parts and labor warranty
  • PowerPak Series Generator
  • Temperature Sensor & 50' lead wire
  • Polished Chrome Steam head
  • Digital Timer & M8 cable
  • Warranty
Swipe horizontally to reveal full table content.
Model PP24LR-240
Input Voltage 208-240VAC , 3-Phase
Kilowatt Rating 24 kW
Maximum Amperage 58 AMPS
Overcurrent Protection Size 70 AMPS
Water Inlet 3/8" Compression
Steam Outlet 1" NPT
Safety Valve 3/4"NPT
Electrical Connection Hardwired
Swipe horizontally to reveal full table content.
Model PP24LR-480
Input Voltage 480VAC, 3-Phase
Kilowatt Rating 24 kW
Maximum Amperage 29 AMPS
Overcurrent Protection Size 40 AMPS
Water Inlet 3/8" Compression
Steam Outlet 1" NPT
Safety Valve 3/4" NPT
Electrical Connection Hardwired

The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet. 

The driver is responsible for curbside delivery “only” and will lower the items to ground level. 

Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses. 

Our goal is to ensure your project's success.

Mr.Steam C1000

CU Series 24kW Steam Shower Generator Package w/CU1000

Model
C1000

The Mr.Steam C1000 Commercial Steam Shower Generator Package is engineered for around-the-clock use in the most demanding health club steam rooms, making it suitable for one or two steam rooms measuring up to 1000 cubic feet (CF). This high-efficiency and low maintenance generator package combines a 24kW CU Generator, Digital 1 Control, CU Steamhead, Automatic Blowdown System, Solenoid Valve, and Auxiliary Manual Reset.

See Shipping Tab

C1000 Club Generator

  • Sight glass
  • Standard with full 1" drain port
  • Stainless steel jacket
  • Compact vertical design
  • Durable electronic components
  • Features National Board registered pressure vessel
  • Use high quality fibrous glass pressure vessel insulation for maximum energy performance
  • Features stainless steel heating elements for corrosion resistance with ASME grade flanges for longevity and reliable performance
  • Steam-rated operating and high limit pressure controls for Steam-On-Demand
  • Pressure gauge and sight glass to provide operating information at a glance
  • Easy installation and service accessibility
  • Meet ASME requirements and UL/CSA nationally recognized testing standards

Digital 1 Control

  • Steam room temperature regulating sensor
  • Advanced low-mass, quick response thermistor with sensor guard
  • Durable and capable of responding to steam room temperature within tight tolerances
  • Electronic temperature control factory pre-installed with panel mount design supplied with a plate for optional remote installation in a standard 4X4 electrical box
  • Allows owner/operator to set room temperature accurately and reliably
  • Providing efficient, consistent control with full 100˚ F - 120˚ F range
  • Integrated in-steam room high temperature control provides an additional level of reliability

Steam Solenoid Valve

  • All brass construction with stainless steel trim, sized to match steamhead distribution
  • Steam-rated seat for high reliability and quick response steam delivery

Aromasteam Steamhead

  • All brass construction with polished chrome finish
  • Full 3/4 inch NPT size for quiet, controlled steam delivery
  • Supplied with full coverage polycarbonate cover
  • Engineered to operate seamlessly with Mr.Steam's AromaFlo aromatic oil delivery system

Automatic Blowdown System

  • System programmed daily discharge of accumulated sediment
  • Digital Timer provides 24/7 startup/shutdown and AutoFlush operation

Auxiliary Manual Reset

  • Independent manual reset
  • Backup low water cutoff control
  • Steam bath generator 30"L x 20"W x 38"H
  • Installation and operation manual
  • Limited warranty
Swipe horizontally to reveal full table content.
Model C1000
Minimum Cubic Feet 751 CF
Maximum Cubic Feet 1000 CF
Kilowatt Rating 24 kW
Shipping Weight 250 lbs
Water Supply Connection 1/4" NPT
Generator Steam Line Connection 1" NPT
Steam Head Connection 3/4" NPT
Drain Connection 1" NPT
Safety Relief Valve Connection 3/4" NPT
Safety Relief Valve PSIG 15 PSIG
Control "Rough In" Cut Out 3-1/2" x 3-1/2"
Control Sensor Cable 30' 5", 25', 2 Conductor, 24 AWG, Shielded Cable
Control Sensor "Rough In" Cut Out 3/8" Diameter
Generator Control Connection 6 Position Terminal Block
Generator Control Cable 6" Long, 4 Conductors, 16 AWG
Width 20"
Depth 30"
Height 38"

 

The weight or packaging of this product requires delivery by special appointment, and on a wooden pallet. 

  The driver is responsible for curbside delivery “only” and will lower the items to ground level. 

  Prior to shipping this product, we contact customers to share shipment details and discuss any extenuating delivery circumstances that may complicate or cause additional delivery expenses. 

  Our goal is to ensure your project success.