Steam Sauna Living SSL-T261
"Plug-In" Electrical Package, 30 AMP 240V 1PH
No need for frequent trips searching for those special electrical components. Steam Sauna Bath has carefully selected and packaged a durable power cord, receptacle, electrical box and cover plate for a simple, maintainable and serviceable steam generator installation. Use of these choice components will allow you to maximize your in-home, factory and labor warranties!
- Selected and packaged for simple, maintainable and serviceable steam generator installation
- Maximizes in-home, factory and Accurate Industries warranties
- One (1) 30AMP, 3-pole, 3-wire, flush-mounted power receptacle with mounting hardware
- One (1) duplex 4"x4" receptacle
- One (1) 4" square, 2-1/2" deep electrical box
- One (1) 6' 3-conductor grounded (3 #10AWG) power cord
- One (1) cord to electrical box connector
Steam Sauna Living SSL-T262
"Plug-In" Electrical Package, 50 AMP 240V 1PH
No need for frequent trips searching for those special electrical components. Steam Sauna Living has carefully selected and packaged a durable power cord, receptacle, electrical box and cover plate for a simple, maintainable and serviceable steam generator installation. Use of these choice components will allow you to maximize your in-home, factory and labor warranties!
- Selected and packaged for simple, maintainable and serviceable steam generator installation
- Maximizes in-home, factory and Accurate Industries warranties
- One (1) 50AMP, 3-pole, 3-wire, flush-mounted power receptacle with mounting hardware
- One (1) duplex 4"x4" receptacle
- One (1) 4" square, 2-1/2" deep electrical box
- One (1) 6' 3-conductor grounded (2 #6AWG, 1 #8AWG) power cord
- One (1) cord to electrical box connector
Steam Sauna Living SSL-T512
Boiler Mounting Stand II
This mounting stand raises the steam generator to the optimal service height for both safety and comfort, during maintenance and repair.
400LB Maximum Weight
- Raises steam generator to optimal service height for safety and comfort during maintenance/repair
- Allows for mopping/sweeping to help keep equipment room clean
- All metal construction
- Aluminum slotted deck
- 400 Lb. capacity
- Mounting platform measures 21-3/4" square
- Square leg base measures 23-3/4" square
- 12" high
Model | SSL-T512 |
---|---|
Width In Inches | 21-3/4" |
Depth In Inches | 21-3/4" |
Height In Inches | 12" |
Shipping Weight (Lbs.) | 10 lbs |
Steam Sauna Living FIT-219
Fitting Package for 2007 PRO Series Generators
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
Note: Also compatible with PRO III series generators
No need for frequent trips searching for those special plumbing fittings…Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation.
Use of these choice fittings will allow you to maximize your in-home, factory and SteamSaunaBath labor warranties! Limited Lifetime Labor Warranty!
NOTE: SteamSaunaBath recommends the use of 1/2" or 3/4" copper pipe for all water, steam, drain and safety valve lines and has provided for such with high-quality copper and brass components. Due to the price structure and nature of these bulk-packaged ingredients, leftover or unused pieces are not returnable.
- (1) 1/2”F NPT x 1/2”F NPT Brass Union
- (1) 1/2” Brass Nipple
- (1) 1/2”C x 1/2”C Brass Water Supply Ball Valve
- (2) 1/2”C x 1/2”M NPT Copper Adapter
- (1) 12” 1/4”F NPT x 1/4”F NPT Braided Steel Water Line (included with generator)
- (1) 1/4”M NPT x 1/2”F NPT Copper Adapter (included with generator)
- (1) Teflon Tape Roll
Steam Sauna Living FIT-220
Fitting Package for SSM & SSA Series Generators
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
Note: Also compatible with PRO I and PRO II series generators
No need for frequent trips searching for those special plumbing fittings…Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation.
Use of these choice fittings will allow you to maximize your in-home, factory and SteamSaunaBath labor warranties! Limited Lifetime Labor Warranty!
NOTE: SteamSaunaBath recommends the use of 1/2" or 3/4" copper pipe for all water, steam, drain and safety valve lines and has provided for such with high-quality copper and brass components. Due to the price structure and nature of these bulk-packaged ingredients, leftover or unused pieces are not returnable.
- (1) 3/4”F NPT x 3/4”F NPT Brass Union
- (2) 1/2”F NPT x 1/2”F NPT Brass Unions
- (1) 1/2” x 3/8” Reducer
- (2) 1/2”C NPT x 1/2”M NPT Copper Adapters
- (3) 3/4”C NPT x 3/4”M NPT Copper Adapters
- (1) 1/2”C x 1/2”C Brass Water Supply Ball Valve
- (1) Teflon Tape Roll
Steam Sauna Living FIT-222
Fitting Package for SAH Series Generators
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
No need for frequent trips searching for those special plumbing fittings…Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation.
Use of these choice fittings will allow you to maximize your in-home, factory and SteamSaunaBath labor warranties! Limited Lifetime Labor Warranty!
NOTE: SteamSaunaBath recommends the use of 1/2" or 3/4" copper pipe for all water, steam, drain and safety valve lines and has provided for such with high-quality copper and brass components. Due to the price structure and nature of these bulk-packaged ingredients, leftover or unused pieces are not returnable.
- (1) 3/8” Brass Close Nipple
- (2) 3/8”F NPT x 1/2”M NPT Brass Reducer
- (1) 1/2” Brass Close Nipple
- (3) 1/2”F NPT x 1/2”F NPT Brass Union
- (1) 1/2”C x 1/2”C Brass Water Supply Ball Valve
- (1) 3/4”F NPT x 3/4”F NPT Brass Union
- (3) 1/2”C x 1/2”M NPT Copper Adapter
- (3) 3/4”C x 3/4”M NPT Copper Adapter
- (1) 1/2”F NPT x 1 /4”F NPT Brass Reducer
- (1) 1/4” Brass Close Nipple
- (1) Teflon Tape Roll
Bathology RB 310
Steam Room Temperature Sensor Guard, 2" x 5"
A sensor tampering cure and more by Bathology!
Expect consistent and reproducible steam bathing temperatures when installing the RB 310 Steam Room Temperature Sensor Guard.
.
- Elegant 4B brushed stainless finish
- Sensor isolation mount
- Rugged 18 gauge stainless steel construction
- Small-scale, low profile design
- Stainless steel fasteners
- Progressive beveling and integral air slots
- Universal sensor installation
- Consistent and reproducible bathing experiences
- Enhanced sensor accuracy
- Well-balanced bathing environment
- Reduces sensor tampering
- Near-permanent installation
- Sensor guard, stainless steel, 5-1/8”W x 2-3/8”H x 1-1/4”D
- (3) Solid wall anchors with anti-rotation fins, AF5 Alligator, flangeless, full length extrusion
- (3) Stainless steel sheet metal screws, Phillips 1" #6 Pan, Type A point, thread size 18
- Sensor screw mount
- Sensor tie
- RTV silicone sealant, .5 oz tube
- Mounting template
- Installation and operation manual
Model | RB 310 |
---|---|
Shipping Weight | 2 lbs |
Material | 18 gauge stainless steel, brushed 4B finish |
Width | 5-1/8" |
Height | 2-3/8" |
Depth | 1-1/4" |
Bathology RB 320
Steam Room Temperature Sensor Guard, 6" x 9"
A sensor tampering cure and more…by Bathology!
Expect consistent and reproducible steam bathing temperatures when installing the RB 320 Steam Room Temperature Sensor Guard.
- Elegant 4B brushed stainless finish
- Sensor isolation mount
- Rugged 18 gauge stainless steel construction
- Progressive beveling and integral air slots
- Universal sensor installation
- Consistent and reproducible bathing experiences
- Enhanced sensor accuracy
- Well-balanced bathing environment
- Reduces sensor tampering
- Low profile design
- Stainless steel fasteners
- Near permanent installation
- Sensor guard, stainless steel, 6-1/8"W x 9-1/4"H x 2"D
- (5) Solid wall anchors with anti-rotation fins, AF5 Alligator, flangeless, full length extrusion
- (5) Stainless steel sheet metal screws, Phillips 1" #6 Pan, Type A point, thread size 18
- Sensor screw mount
- Sensor tie
- RTV silicone sealant, .5 oz tube
- Mounting template
- Installation and operation manual
Model | RB 320 |
---|---|
Shipping Weight | 3 lbs |
Materials | 18 gauge stainless steel, brushed 4B finish |
Width | 6-1/8" |
Depth | 2" |
Height | 9-1/4" |
GENPAN-XL
Generator Pan
Designed for use with 20-30kw units in the unlikely event of a slow water leak.
- Galvanized material
- Solid brass drain connection
- Integral generator support
- Measures 14"W x 24"L x 2"H
- Generator Pan XL
Model | GENPAN-XL |
---|---|
Material | Galvanized |
Connections | 3/4" MGHT male threaded NPT and 1/2" NPT female brass connection |
Width | 14" |
Length | 24" |
Height | 2" |
Steam Sauna Living FIT-208
Fitting Package for AR/AK/AX Series Generators
No need for frequent trips searching for those special plumbing fittings, Steam Sauna Living has carefully selected and packaged the brass and copper couplers, nipples, valves and unions for a simple, maintainable and serviceable steam generator installation. Use of these choice fittings will allow you to maximize your in-home, factory and labor warranties!
NOTE: For generators with 1/2" drain
- (1) 3/8” Brass Close Nipple
- (1) 3/8”F NPT x 1/2”M NPT Brass Reducer
- (1) 1/2” Brass Close Nipple
- (1) 1/2” x 2” Brass Nipple
- (3) 1/2”F NPT x 1/2”F NPT Brass Union
- (1) 1/2”C x 1/2”C Brass Water Supply Ball Valve
- (1) 3/4”F NPT x 3/4”F NPT Brass Union
- (3) 1/2”C x 1/2”M NPT Copper Adapter
- (3) 3/4”C x 3/4”M NPT Copper Adapter
- (1) Teflon Tape Roll